Yaris and Viper 4204v remote start

[eeosman]

Originally Posted by CTScott

The xpresskit one is fine. For the t-taps, I always buy the 3M ones, but really any will do. In the case of remote starting a Yaris, all of the connections are relay coil side, rather than contact side, so it is all low current.

Did you test the key disabling the alarm?

I mean what gauge t-tap. Yeah I kill the alarm by pressing the unlock button on my key.

[CTScott]

Originally Posted by eeosman

I mean what gauge t-tap. Yeah I kill the alarm by pressing the unlock button on my key.

You will need t-taps for 22-18 AWG wire.

With killing the alarm, you need to test by unlocking the door with sticking the key in the lock, as opposed to pressing the button on the the key. The button press goes through a way that the remote starter will not have access to.

[eeosman]

Originally Posted by CTScott

You will need t-taps for 22-18 AWG wire.

With killing the alarm, you need to test by unlocking the door with sticking the key in the lock, as opposed to pressing the button on the the key. The button press goes through a way that the remote starter will not have access to.

Non-remote car key can kill the alarm by unlocking doors. So does it mean that I can connect the oem alarm to the remote start?

[CTScott]

Originally Posted by eeosman

Non-remote car key can kill the alarm by unlocking doors. So does it mean that I can connect the oem alarm to the remote start?

I believe so. Also, try getting in, locking the doors, arming the alarm, and then starting it to see if the alarm triggers.

[eeosman]

Originally Posted by CTScott

I believe so. Also, try getting in, locking the doors, arming the alarm, and then starting it to see if the alarm triggers.

It triggers at 'ON' position.

[CTScott]

Originally Posted by eeosman

It triggers at 'ON' position.

OK. So you would have to trigger the door key signal with the remote starter's "factory alarm disable" output to prevent that.

[eeosman]

Originally Posted by CTScott

OK. So you would have to trigger the door key signal with the remote starter's "factory alarm disable" output to prevent that.

I am back to my Yaris

Ok. So, how can i connect it? I have your 2006+ guide, but French Yaris has different wiring, could you share it and give some help the noob, please?