Yaris Steering wheel Swap with Controls.

[CTScott]

The wiring from the clockspring to the headunit is part of the dash harness, so you would have to track down the entire dash harness of the vehicle you use the clockspring from. Or, you can just purchase the connector shells and buy the "repair terminals" to populate them. Toyota charges $12 to $20 per connector pin, but I stock them for a whole lot less, if you go that route.

[A1phazu1u]

Originally Posted by CTScott

The wiring from the clockspring to the headunit is part of the dash harness, so you would have to track down the entire dash harness of the vehicle you use the clockspring from. Or, you can just purchase the connector shells and buy the "repair terminals" to populate them. Toyota charges $12 to $20 per connector pin, but I stock them for a whole lot less, if you go that route.

I guess ill purchase them from you, ill contact you when I receive my clock spring. Thanks again Scott.