Replacement of interior light bulb (New Yaris)

[Eren_13]

Hi Geoff

I've changed both the interior map reading lights and dome. Both of which I just pried on the plastic bits and they eventually do pop off. Can get you reference photos of where I pulled if you wish? Are you changing the centre lights or the ones above driver and passenger?

Eren.

[Geoff Peace]

Originally Posted by Eren_13

Hi Geoff

I've changed both the interior map reading lights and dome. Both of which I just pried on the plastic bits and they eventually do pop off. Can get you reference photos of where I pulled if you wish? Are you changing the centre lights or the ones above driver and passenger?

Eren.

Thankyou for your reply Eren. It is the centre light bulb I need to change, the ones over the passenger/driver, vanity lights I think they are called are OK. Photographs would be an enormous help, I am very wary of plastic parts and simply do not wish to break anything. Once again, thankyou for your help.
Regards Geoff Peace.

[Eren_13]

Originally Posted by Geoff Peace

Thankyou for your reply Eren. It is the centre light bulb I need to change, the ones over the passenger/driver, vanity lights I think they are called are OK. Photographs would be an enormous help, I am very wary of plastic parts and simply do not wish to break anything. Once again, thankyou for your help.
Regards Geoff Peace.

You're very welcome. The centre lights I literally just pulled at the sides of the plastic cover and off it popped. Seeing as there was no help in the manual I did in fact take a risk as I wasn't sure if the whole unit would come out. I'll try and upload some photos this evening Geoff and hopefully they'll help. I don't want to suggest pulling in case it does go the opposite way for you and then it breaks but that's what I did so if you feel up to it then give it a go.

[Geoff Peace]

Originally Posted by Eren_13

You're very welcome. The centre lights I literally just pulled at the sides of the plastic cover and off it popped. Seeing as there was no help in the manual I did in fact take a risk as I wasn't sure if the whole unit would come out. I'll try and upload some photos this evening Geoff and hopefully they'll help. I don't want to suggest pulling in case it does go the opposite way for you and then it breaks but that's what I did so if you feel up to it then give it a go.

Thankyou for your help Erren, I will wait for your photographs before I try. Just to be on the safe side!
Regards Geoff Peace.

[Geoff Peace]

Originally Posted by Geoff Peace

Thankyou for your help Erren, I will wait for your photographs before I try. Just to be on the safe side!
Regards Geoff Peace.

Eren 13. I wonder if you would be so kind as to post a photograph or two showing how to remove the interior light on the Mk.3 Yaris. I have tried pulling and prising but the thing does not want to cooperate. I notice there is now another thread on the same subject on the forum. If you can spare the time I would be most grateful.
Regards Geoff Peace.