Power Locks/ Remote Start

[pat005]

Sorry about the shameless bump, but I actually got around to installing the remote starter and started installing the actuators, I bought the actuators but I seem to be missing the piece that keeps the rod and cable parallel, is there somewhere I can get that or should I just call A1 and have them mail it to me. I have the remote starter hooked up to the 12V and it seems to be on, but when I try to start from the remote, the car turns on, but doesn't crank, and then just turns back off. Also, is it okay for me to splice the 12V coming into the remote starter so that I can get some juice for my actuators as well, or is there another place for me to get some juice for the actuators?

Forgot to mention, I kind of rigged the ground coming out of the remote starter and it goes from the 18g to like a 24g. Also it makes static sounding sounds(coming from the little control unit)
TL:DR
Missing thing that makes cable and actuator rod parallel, where to find?
Remote starter turns on car, doesn't crank, and turns back off; Any ideas?
Should I splice into the 12V that the remote starter is currently plugged into to power actuators as well, or different area for power (where?)


Thanks!