Sedan GT Street Kit Install Thread (WIP)

[47_MasoN_47]

Ok well I've finally gotten the housings cut up sufficiently where I feel like I can permanently mount the projectors in there.



I seated the lights properly in the front of the car so that they aren't pointing directly at the ground this time.



It gets a nice cutoff (most of the light above the cutoff is just from the camera), but is way too low. I looked through my car's manual and couldn't find anything on headlight adjustment, but they need to be cranked up a fair bit.



Here's the view from inside the car showing why they need to be raised.

Low beam

High beam


So does anyone know how to adjust the headlights on the Yaris sedan?

[Brian]

Originally Posted by 47_MasoN_47

So does anyone know how to adjust the headlights on the Yaris sedan?

Turn the knobs on the back of the headlights to raise and lower. You can do it by hand or with a socket or screwdriver.