DIY Cruise Control for 2012 Yaris - Good News!

[CTScott]

Originally Posted by geoded

I understand the need to loosen the screw from the one in picture 1 and picture 2, but do not know exactly what wires need to see, you have a picture of what should I see there?

I am looking for the connector on the left in the photo below. You will remove the two screws behind the steering wheel and the one by the tilt lever to remove the lower cover.

[geoded]

Originally Posted by CTScott

I am looking for the connector on the left in the photo below. You will remove the two screws behind the steering wheel and the one by the tilt lever to remove the lower cover.

This is my car connector, (1ND-TV), has beige and brown is, but cruise control does not work. :-)