For Sale: Every single part off an 07 MT Liftback

[ilikerice]

Hey scott, I need the this part in front of the PASSENGER side mirror. My clips are broken so it kinda rattles in the wind sometimes. How much to Savannah, GA 31419?

[Astroman]

Scott, I'm in need of the fresh air/recirculating air assembly. A shop put some stuff in backwards years ago and it broke the cover on the bottom left (the c or half clam shell part) that actually diverts the fresh and recirculating air. Also when it did this it messed the cable up. Switch is fine. I really need it.

I'm also curious if I could get a price on the manual trans conversion parts (been wanting to do that since I bought the auto), and the right interior door panel (I broke my speaker cover on the door), zip 98802.

[CTScott]

Originally Posted by Astroman

Scott, I'm in need of the fresh air/recirculating air assembly. A shop put some stuff in backwards years ago and it broke the cover on the bottom left (the c or half clam shell part) that actually diverts the fresh and recirculating air. Also when it did this it messed the cable up. Switch is fine. I really need it.

I'm also curious if I could get a price on the manual trans conversion parts (been wanting to do that since I bought the auto), and the right interior door panel (I broke my speaker cover on the door), zip 98802.

So, you need the whole "bread box" assembly - That is definitely doable. Let me pull it and get a weight and I'll shoot you a quote.

Ryze268 beat you to asking about the MT conversion kit. If he doesn't bite, you are next in line.

The interior door panels (and possibly entire doors) are sale pending.

[CTScott]

Originally Posted by ilikerice

Hey scott, I need the this part in front of the PASSENGER side mirror. My clips are broken so it kinda rattles in the wind sometimes. How much to Savannah, GA 31419?

The passenger side one was gone. The driver side one is there, but two of the clips snapped when I was removing it. For yours, either use some 3M double sided tape or 3M emblem and molding adhesive (comes in a tube). My red one (Crashy #2) had broken clips and I used the 3M adhesive.

[ilikerice]

Originally Posted by CTScott

The passenger side one was gone. The driver side one is there, but two of the clips snapped when I was removing it. For yours, either use some 3M double sided tape or 3M emblem and molding adhesive (comes in a tube). My red one (Crashy #2) had broken clips and I used the 3M adhesive.

common issue I assume then. Thanks for the tip. Will do that later