Airbag light panel is ON

[edelgados27]

Hello.

Some time ago I had problems with the code 14 in the end the problem was the wiring.

A couple of weeks ago, the srs light was returning to be turned on, but only when he turned the wheel, was paid in the next engine start.

Yesterday, I remain fixed, I thought it was past connections, so I went back to splice the wires.

Now I have the code 14 and 51, my question is, if I change the front sensor wires with the battery connected, the code 14 again, or should automatically eliminate, or scanner is required to remove it.

The 51 is the spiral cable, even should I check.

I appreciate your valuable help, I'm desperate for that light.

[CTScott]

Originally Posted by edelgados27

Hello.

Some time ago I had problems with the code 14 in the end the problem was the wiring.

A couple of weeks ago, the srs light was returning to be turned on, but only when he turned the wheel, was paid in the next engine start.

Yesterday, I remain fixed, I thought it was past connections, so I went back to splice the wires.

Now I have the code 14 and 51, my question is, if I change the front sensor wires with the battery connected, the code 14 again, or should automatically eliminate, or scanner is required to remove it.

The 51 is the spiral cable, even should I check.

I appreciate your valuable help, I'm desperate for that light.

The 14 and 51 codes are both ones which will not clear on their own or by disconnecting the battery. Look at the first page of this thread for instructions on how to clear the codes, using the same jumper that you used to read them.