retro fit project got question? help!

[47_MasoN_47]

I have those same projectors. Maybe for the 3 door you won't have to cut, but I had to do a good bit of cutting on my sedan ones. I had to open the back of the housing up a little to get the wiring through, then I had to cut the blinker housing and the plastic bit that attaches directly to the lens. I filled the hole in with JB Weld plastic putty stuff.

I used Krylon Fusion satin black paint for mine. You'll want to sand the chrome stuff off, otherwise the paint won't stick well.

I used the 3m sealant they use around windshields for sealing the lights back up. I've had 0 fogging. Those projectors are awesome, you picked well :) Enjoy them!

Here's some of the cutting I had to do.

[marcus]

nice.. is that the mini gatling gun shroud or the 2.0.. and what size led did you use??

Originally Posted by 47_MasoN_47

I have those same projectors. Maybe for the 3 door you won't have to cut, but I had to do a good bit of cutting on my sedan ones. I had to open the back of the housing up a little to get the wiring through, then I had to cut the blinker housing and the plastic bit that attaches directly to the lens. I filled the hole in with JB Weld plastic putty stuff.

I used Krylon Fusion satin black paint for mine. You'll want to sand the chrome stuff off, otherwise the paint won't stick well.

I used the 3m sealant they use around windshields for sealing the lights back up. I've had 0 fogging. Those projectors are awesome, you picked well :) Enjoy them!

Here's some of the cutting I had to do.