2007 Yaris blinkers don't work HELP - Toyota Yaris Forums

jwoehrle · 01-16-2014, 02:24 PM

TO: CTScott

Thanks again for all the help..just wanted to let you know i've fixed the problem and it WAS the 10amp Gauge fuse...here's the thing though. that was the FIRST thing i checked before i even sought out this message board for help. when i examined it, the filament wasn't broken, fuse looked good. however when i tested it with a multi tester while it was still in place, it read full voltage on one side, only half on the other. replacing the fuse fixed everything. it was bad, but not "blown" to the naked eye

CTScott · 01-16-2014, 03:46 PM

Quote:

Originally Posted by jwoehrle

TO: CTScott

Thanks again for all the help..just wanted to let you know i've fixed the problem and it WAS the 10amp Gauge fuse...here's the thing though. that was the FIRST thing i checked before i even sought out this message board for help. when i examined it, the filament wasn't broken, fuse looked good. however when i tested it with a multi tester while it was still in place, it read full voltage on one side, only half on the other. replacing the fuse fixed everything. it was bad, but not "blown" to the naked eye

That is wild. It cooked enough to thin it out, but not enough to fully blow it. I can't say that I have seen one do that before.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
News : 2007 Toyota Yaris - the little Euro's official arrival	VitzBoy	General Yaris / Vitz Discussion	9	06-06-2017 12:51 AM
2007 Toyota Yaris Hatchback - 5-Speed Manual	truebreakerz	Cars for Sale by private party	23	09-17-2009 09:29 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM

01-16-2014, 02:24 PM	#1
jwoehrle Drives: 2007 yaris liftback Join Date: Jan 2014 Location: milford,pa Posts: 6	TO: CTScott Thanks again for all the help..just wanted to let you know i've fixed the problem and it WAS the 10amp Gauge fuse...here's the thing though. that was the FIRST thing i checked before i even sought out this message board for help. when i examined it, the filament wasn't broken, fuse looked good. however when i tested it with a multi tester while it was still in place, it read full voltage on one side, only half on the other. replacing the fuse fixed everything. it was bad, but not "blown" to the naked eye