Yaris Sedan Deadening and Sound system upgrade

[sqcomp]

Do a bit ten. Save the p99 for later.

That bit ten is smaller than the deck and will allow you to keep the factory look which is nice.

As for the w6.5, we have a limitation. The frequency response is 60-300 Hz. I'm looking at the AW6.5 right now with Jim. I'll keep you in the loop.

[derickveliz2]

Originally Posted by sqcomp

Do a bit ten. Save the p99 for later.

That bit ten is smaller than the deck and will allow you to keep the factory look which is nice.

As for the w6.5, we have a limitation. The frequency response is 60-300 Hz. I'm looking at the AW6.5 right now with Jim. I'll keep you in the loop.

oK, Lets talk "Bit Ten"

-Only good for a 2 way + Subwoofer right?

-I can plug 2 sets (4 channel) of channels into Bit Ten... Front door speakers and front tweeters to get the signal from the MB head unit (MB=Mercedes Benz) the Bit Ten is going to de-equalize and then provide 3 channels out like L+R Midbass, L+R Tweeter, + Subwoofer

-Does the Bit Ten has Left and Right EQ?

-An finally... how much it costs?

D.

[sqcomp]

Originally Posted by derickveliz2

oK, Lets talk "Bit Ten"

-Only good for a 2 way + Subwoofer right?

-I can plug 2 sets (4 channel) of channels into Bit Ten... Front door speakers and front tweeters to get the signal from the MB head unit (MB=Mercedes Benz) the Bit Ten is going to de-equalize and then provide 3 channels out like L+R Midbass, L+R Tweeter, + Subwoofer

-Does the Bit Ten has Left and Right EQ?

-An finally... how much it costs?

D.

http://www.audison.eu/index.php?page=product&id=42

Cost? 300-400. It's more effective than any analog piece from the 80-90s to be honest. You have the ability to see the entire crossover and EQ layout, the ability to make adjustments on the fly while seeing and hearing the effect pretty much instantly. You have time alignment as well. In the setup of the PC program, it should ask if you are using a two or three way.

I can have Jim call you if you'd like.

[derickveliz2]

Originally Posted by sqcomp

http://www.audison.eu/index.php?page=product&id=42

Cost? 300-400. It's more effective than any analog piece from the 80-90s to be honest. You have the ability to see the entire crossover and EQ layout, the ability to make adjustments on the fly while seeing and hearing the effect pretty much instantly. You have time alignment as well. In the setup of the PC program, it should ask if you are using a two or three way.

I can have Jim call you if you'd like.

Yes I would like to talk to him and go over details,

Thanks.

D.