DIY - Liftback Intermittent Wipers via Stalk Replacement (v2.0)

[CTScott]

Originally Posted by duende_80

Hello CTScott, our operation is off does nothing, in on doing intermittent wipe and spray the water makes continuous, also has another position to just spray the water, so my question is the intermittent wipe.

Ours is this command:



And I'm going to buy is this:



I want auto function because I want to put a rain sensor.

With ours the rear does not have an intermittent mode, just the front does. If you install a Prius wiper switch there is an unused position which can be used to control an intermittent add on module.

[duende_80]

Originally Posted by CTScott

With ours the rear does not have an intermittent mode, just the front does. If you install a Prius wiper switch there is an unused position which can be used to control an intermittent add on module.

The question is that mine does not have the continuous function unless you pull the water sprayer.

I put a video I made this afternoon with the operation.

https://www.youtube.com/watch?v=uN5kz8EkJag

[CTScott]

Originally Posted by duende_80

The question is that mine does not have the continuous function unless you pull the water sprayer.

I put a video I made this afternoon with the operation.

https://www.youtube.com/watch?v=uN5kz8EkJag

Interesting. Check the wiring going into the wiper switch to see if someone installed a wiper delay module. In the ON mode they normally run continuously, like yours does in the spray mode.

[duende_80]

Originally Posted by CTScott

Interesting. Check the wiring going into the wiper switch to see if someone installed a wiper delay module. In the ON mode they normally run continuously, like yours does in the spray mode.

The truth is that if someone has installed a module or something has been in the actual assembly of toyota since we bought the car new, the truth that I dread plug and non-plug and play like your tutorials.

[CTScott]

Originally Posted by duende_80

The truth is that if someone has installed a module or something has been in the actual assembly of toyota since we bought the car new, the truth that I dread plug and non-plug and play like your tutorials.

I just realized you are in Spain. For some crazy reason I had assumed you were in Puerto Rico (with a US spec Yaris). Now, I am thinking that the European Yaris has something different about the internals of the wiper switch that causes the delay in ON mode.

[duende_80]

Originally Posted by CTScott

I just realized you are in Spain. For some crazy reason I had assumed you were in Puerto Rico (with a US spec Yaris). Now, I am thinking that the European Yaris has something different about the internals of the wiper switch that causes the delay in ON mode.

If could be that the European version instead of intermittent and continuous scan so serious safer backwards that you would lose, continuous sweep.

What most interests me is that it is compatible with the car and can put without problems that do not match the wires to the main functions.

[CTScott]

Originally Posted by duende_80

If could be that the European version instead of intermittent and continuous scan so serious safer backwards that you would lose, continuous sweep.

What most interests me is that it is compatible with the car and can put without problems that do not match the wires to the main functions.

I just looked at the European wiring diagrams and there are two versions (with intermittent and without intermittent). The intermittent function is built into the wiper motor assembly, not into the switch.