Help! Wanting to get dirtbike rack fitted

[CTScott]

Originally Posted by Gogogordy

Do you know if that Curt 11050 will fit an '11 equipped with TRD cat-back and TRD rear sway bar?

I believe it will with no problem. Installed, the only thing that hangs below the bottom edge of the bumper is the receiver (in the center). By the exhaust it is completely tucked up there.

[Gogogordy]

Originally Posted by CTScott

I believe it will with no problem. Installed, the only thing that hangs below the bottom edge of the bumper is the receiver (in the center). By the exhaust it is completely tucked up there.

Thanks for the reply. The TRD seems a bit larger than the OEM exhaust....ample clearance with the Curt. Does anyone have any pix of the Curt towbar in relation to either the OEM or TRD exhaust?

[CTScott]

Originally Posted by Gogogordy

Thanks for the reply. The TRD seems a bit larger than the OEM exhaust....ample clearance with the Curt. Does anyone have any pix of the Curt towbar in relation to either the OEM or TRD exhaust?

Here's a pic of mine with the OEM exhaust. As you can see, the only place where the curt extends below the bumper plastics is at the rear tie down:
Curt Hitch - Oem Exhaust.jpg