 |
 |
|
|
|
|
01-02-2015, 12:49 PM
|
#1 |
|
What I thought I'd do was
Drives: 09 Yaris Sedan Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
|
That seems like low mileage to be having cylinder problems. I didn't replace the master and slave cylinder on my Nissan Hardbody till 250k miles. The fluid can make a big difference though. If it's dirty or cloudy it can affect clutch performance. IMO it would be worth a shot to drain the clutch fluid out, refill it all with new fluid, then bleed the master/slave cylinders again.
It's also possible you've got some air in the lines. Bleeding a clutch can be a real pain. It took me a few times before I got all the air out of my truck's clutch when I replaced the cylinders.
__________________
 My Nissan Hardbody (D21) 4x4 build log Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47 |
|
|
|
01-05-2015, 09:34 AM
|
#2 | |
 Drives: 2('14+'07)MT 3d ,wHandCrWndws! Join Date: May 2009
Location: S.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles
Posts: 4,839
|
Quote:
 Very interesting.
|
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Getting Rid of the infamous Clutch "Shudder" | tmontague | DIY / Maintenance / Service | 14 | 07-08-2023 01:56 PM |
| Clutch Maintenance | fnkngrv | DIY / Maintenance / Service | 12 | 03-03-2017 10:42 AM |
| need help on my 2008 yaris compress clutch | susucosp | DIY / Maintenance / Service | 0 | 05-15-2014 03:48 PM |
| HOW TO REBUILD YOUR MASTER CYLINDER | "G" | DIY / Maintenance / Service | 3 | 08-14-2011 09:42 AM |
| NEED ENGINE CHECK LIGHT CODE LIST | Attitude | Forced Induction Forum | 12 | 04-11-2011 06:38 PM |
Hybrid Mode
