FS: TEIN STREET ADVANCE Coilovers (Lots of Pics!)

[Thebigwicks]

Are there anything missing or wrong on these?

[juicyjosh]

Originally Posted by Thebigwicks

Are there anything missing or wrong on these?

Nothing at all is wrong with these coil overs.

As stated above, they were only on the Yaris for 14 months for about 6800 miles, originally installed and removed by yours truly. I've provided as much detail as to their history as possible so the new owner can buy with confidence.

Everything in the first 8 pictures of this thread is included. The TEIN STREET ADVANCE coil overs use the following parts off your stock Yaris:

For the fronts, the TEINs use the stock bump stops (cut in half), the stock spring top plate to hold the spring (secured by the gold nut), then place the big stock rubber bushing/mount on top and bolt the coil over on the car. (The gold nut and big rubber bushing/mount are pictured above.) The stock Yaris bolt-on hardware (i.e. bolts and washers) are used at the top of the struts/shocks at all 4 corners.

I've packaged the entire set of TEIN STREET ADVANCE coil overs at the same height settings as I had on my Yaris (pictured, not included), which is maximum low in the front, and room to play in the rear (either go another inch or so lower, or raise it up about 3 inches), so the buyer will already know how her or his car will look with the STREET ADVANCEs out-of-the-box, based on the pics.