Installed Tach...Tach works, RADIO doesn't!

[5spBlazer]

Well, i placed a new fuse for the radio and the radio still doesn't work. I figured that the radio might work if i placed the the originel fuse in the place where i installed the red wire, but that doesn't work either. I can't figure out why the radio might not work.

I had foglights installed at a sound shop. When i was installing the tach there were alot of extra wires in there for the fogs. Could they have something to do with this.

I've basically narrowed it do to either the red wire or the white one. Can't be black cause thats ground and nothing to do with audio? and green since its just going to the engine....

I'm confused.

[Nutzoids]

Originally Posted by 5spBlazer

I've basically narrowed it do to either the red wire or the white one. Can't be black cause thats ground and nothing to do with audio? and green since its just going to the engine....

I'm confused.

Alright...

Black = "HotWire" Current Flowing
Green = "Ground" Drain Voltage
Red or White = "Neutral" or "+"