My 2011 Vitz - Toyota Yaris Forums

Freestylin · 05-10-2015, 02:21 PM

Have the front springs been pre-loaded correctly?

TerenceCruz · 05-10-2015, 10:29 PM

Quote:

Originally Posted by Freestylin

Have the front springs been pre-loaded correctly?

There is some play where the springs can move up and down a bit, but I dropped some of the preload a little bit in order to get to the height I wanted. If I spin the shock down any more it's too close to my axle. I was wondering if it was the spring bouncing, but once the weight of the car is on the ground the springs shouldn't be able to move, correct?

05-10-2015, 02:21 PM	#1
Freestylin Drives: 09 Blizzard Pearl RS LB Join Date: Sep 2009 Location: Calgary, Alberta Posts: 371	Have the front springs been pre-loaded correctly? __________________ “On a given day, a given circumstance, you think you have a limit. And you then go for this limit and you touch this limit, and you think, 'Okay, this is the limit'. And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.” ― Ayrton Senna

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2010 Vitz RS Modellista Completed Car	Vitz Rs Modellista	Photo-Video-Media Gallery	38	11-18-2014 01:25 PM
2012 Vitz from the 2011 Tokyo Auto Salon	CTScott	Third Gen Yaris General Discussion	14	02-10-2011 09:06 AM
Is UA-NCP13 1.5L Manual Trans a Vitz RS?	WesSunday	General Yaris / Vitz Discussion	1	11-28-2010 11:47 AM
Newly refreshed 2011 Toyota Corolla	Kal-El	Off-topic / Other Cars / Everything else Discussions	23	11-27-2010 01:57 PM
A German Yaris/Vitz/Echo ;)	we-to-11	Photo-Video-Media Gallery	5	06-27-2007 09:26 PM