Yaris Motor Swap Thread *Read before posting swap threads*

[RagnaCaT]

Let me chime in 1zz is possible with no cutting to fit it, but not a great swap cuase of the fabrication involed and wiring rather drop a 2zz.... The 1zz tranny or housing is required. Cutting the chassis is required if you are planning on a 6spd...
The 2ZRFE is almost a drop in swap and you can use the stock tranny...


Sent from my iPhone using Tapatalk

[Bluevitz-rs]

Originally Posted by RagnaCaT

Let me chime in 1zz is possible with no cutting to fit it, but not a great swap cuase of the fabrication involed and wiring rather drop a 2zz.... The 1zz tranny or housing is required. Cutting the chassis is required if you are planning on a 6spd...
The 2ZRFE is almost a drop in swap and you can use the stock tranny...


Sent from my iPhone using Tapatalk

Let's make sure we're on the same page here. They're talking about a fist gen chassis.

[RagnaCaT]

Originally Posted by Bluevitz-rs

Let's make sure we're on the same page here. They're talking about a fist gen chassis.

Ooooh! ok So it's the other way around, 1zz wiring is similar to the first gen as the ECHO we get here in PR and its the almost the same demensions 2zz swaps are around


Sent from my iPhone using Tapatalk

[Tarmat Terror]

Thanx for the advice so far guys it was helpful im going to do the swap and turbo charge but can i put on a 6spd box without and fabrication?