Lining up the head lights '09

[IllusionX]

Hm? Put a Philips head screw driver in the hole. That's the adjuster for height. There are no horizontal adjustments AFAIK. If you look down there, you will see it, it can also be adjusted with a hex wrench.

uploadfromtaptalk1445528209866.jpg

Sent from my A0001 using Tapatalk

[CTScott]

Originally Posted by IllusionX

Hm? Put a Philips head screw driver in the hole. That's the adjuster for height. There are no horizontal adjustments AFAIK. If you look down there, you will see it, it can also be adjusted with a hex wrench.

Attachment 56051

Sent from my A0001 using Tapatalk

Correct - It is vertical only. There is no horizontal adjustment.

[BennyLava]

Originally Posted by IllusionX

Hm? Put a Philips head screw driver in the hole. That's the adjuster for height. There are no horizontal adjustments AFAIK. If you look down there, you will see it, it can also be adjusted with a hex wrench.

Thank you sir. I have been trying to get a straightforward answer out of this forum for a long time. You're the only one who's ever just spit out this simple answer.

And with it i was able to adjust the lights. Thanks again

[BennyLava]

Originally Posted by CTScott

It is visible in the first pic. It is the device, which is a bolt with a large washer looking device under the head of it.

Got this thread and this reply confused with another help thread I have on a different form.

That said, I noticed your reply says something totally different than his. You say its that one with the washer looking head, he says it those others. For me, the ones he said turned out to be the correct one.

So is the other one for something else?