How to hot wire the Yaris - Toyota Yaris Forums

extreme.aly · 10-24-2015, 02:47 PM

Sorry for bringing back a 5 year old post back to life :p

I'm also trying to get my engine "on" wirelessly. But in my case, I'm trying to give my car both options. Turn the engine on with keys or without keys (via bluetooth).

So I want to make sure what exactly happens to the IGNITION SWITCH PINS at different states. Please correct me if i'm wrong.

At LOCK position: nothing is connected to anything
At ACC position: AM1 is connected to ACC
At On position: AM1 is connected to ACC and IG1
At Starter position: AM1 is connected to ACC and IG1, and AM2 is connected to ST2 and IG2

AM1: Yellow wire
ACC: White wire
IG1: Green wire
AM2: Gray wire
IG2: Pink wire
ST2: Black wire

Is that right?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Bypassing Tire Pressure Warning System (TPWS / TPMS)	CTScott	DIY / Maintenance / Service	221	07-16-2025 02:20 AM
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
Blitz S/C being installed this Saturday!	LtNoogie	Forced Induction Forum	179	12-14-2012 09:53 PM
JDM GROUND WIRE VOLTAGE STABILIZER TOYOTA YARIS	jamal1984	Performance Modifications	17	03-26-2007 02:01 PM

10-24-2015, 02:47 PM	#1
extreme.aly I've made a post! Drives: Toyota Vitz 2009 Join Date: Oct 2015 Location: Karachi, Pakistan Posts: 1	Sorry for bringing back a 5 year old post back to life :p I'm also trying to get my engine "on" wirelessly. But in my case, I'm trying to give my car both options. Turn the engine on with keys or without keys (via bluetooth). So I want to make sure what exactly happens to the IGNITION SWITCH PINS at different states. Please correct me if i'm wrong. At LOCK position: nothing is connected to anything At ACC position: AM1 is connected to ACC At On position: AM1 is connected to ACC and IG1 At Starter position: AM1 is connected to ACC and IG1, and AM2 is connected to ST2 and IG2 AM1: Yellow wire ACC: White wire IG1: Green wire AM2: Gray wire IG2: Pink wire ST2: Black wire Is that right?