First US 2ZR-FE Yaris swap gains exposure

[Jason@SportsCar]

Originally Posted by ArmstrongRacing

When using a 2zr manual transmission you need the xd ABS module and wiring too...because there is no speed sensor on that transmission. Possibly the axles as well, and I think the gear ratios are taller.

2012+ Yaris does not have a speed sensor on the trans either, pulls it from the ABS tone ring.

[ArmstrongRacing]

Originally Posted by Jason@SportsCar

2012+ Yaris does not have a speed sensor on the trans either, pulls it from the ABS tone ring.

This would make the 2zr swap so much easier...are the 2012+ 1nz's using a micro MAF sensor too?....that would be a direct swap with no wiring changes!

[Jason@SportsCar]

Originally Posted by ArmstrongRacing

This would make the 2zr swap so much easier...are the 2012+ 1nz's using a micro MAF sensor too?....that would be a direct swap with no wiring changes!

MAF sensor is the same from 2007-2015. The thing that could hurt your swap on a 2012+ is the ECU and harness plugs, they are different. When we built the 2015 it was easier to swap the entire harness from the 2007 versus rewiring. If you can use the Yaris ECU and engine harness on the 2ZR you should be able to put it in any year car.