Yaris III Hybrid Synergy Drive 100 how to disable TCS/VSC

[EricGSXR]

It's only possible with Techsteam or IT2.
Otherwise users will destroy the car.

There is no button. Just like Prius, Auris, etc.

[CTScott]

Originally Posted by EricGSXR

It's only possible with Techsteam or IT2.
Otherwise users will destroy the car.

There is no button. Just like Prius, Auris, etc.

On the Prius, one has to do the procedure below to temporarily disable it:

These steps must be completed within 60 seconds.

Step 1: Set the ignition switch to ON, not READY. To do this press the power button two times, without pressing the brake pedal.

Step 2: While the transmission is still in park (P), fully press the gas pedal two times.

Step 3: Apply the parking brake to ensure that the vehicle will not move during this step. Put the transmission in neutral (N) and fully press the gas pedal two times.

Step 4: Put the transmission back in park (P) and fully press the gas pedal two times. The car will display “!Car!” in the upper left corner of the LCD screen.

Step 5: Press the brake pedal and turn the ignition switch to the start position, without going back to the ready position, to start the engine.

If these steps are followed correctly, the vehicle will start with the traction control system defeated.