Changed Spark Plugs and Now Car Won't Start

[Exiwolfman]

Originally Posted by VegeLasagna

Is there a surefire way to tell that it's in the right order. I asked my dad and he said he put it back in the right order

I find it hard to believe u mixed it up its not like old wires, I still say throttle body needs a good clean, like when u replaced a battery on a high km car on flyby wire this happens 90% of the time.

Sent from my Nexus 5X using Tapatalk

[VegeLasagna]

Originally Posted by Exiwolfman

I find it hard to believe u mixed it up its not like old wires, I still say throttle body needs a good clean, like when u replaced a battery on a high km car on flyby wire this happens 90% of the time.

Sent from my Nexus 5X using Tapatalk

K I'll try that thanks. The car is shaking like crazy and when pressing down on gas, it shakes even more and makes a not so good sound kind of like the muffler is loud.

[VegeLasagna]

So I just finished cleaning the throttle body.

It didn't work. Still the same thing.

The exhaust in the back is pumping.
And I took a pic of the spark plugs (the new ones that we put in) and they're black now.

[CTScott]

Originally Posted by VegeLasagna

So I just finished cleaning the throttle body.

It didn't work. Still the same thing.

The exhaust in the back is pumping.
And I took a pic of the spark plugs (the new ones that we put in) and they're black now.

Do you have any modifications to the car, as those are crazy fouled?

[VegeLasagna]

Originally Posted by CTScott

Do you have any modifications to the car, as those are crazy fouled?

No. Only mod is headlights.

[CTScott]

Originally Posted by VegeLasagna

No. Only mod is headlights.

Truly a strange issue. Did you per chance fill up with gas just before you replaced the plugs?

[jack black]

Originally Posted by VegeLasagna

And I took a pic of the spark plugs (the new ones that we put in) and they're black now.

they wont work in this state (and probably never). clearly the engine runs only on 1-2 cylinders. did you somehow damage the coils during installation? are the plugs properly screwed in and properly torqued? what is the condition of the old plugs now?