Yaris 2015 Cruise Control & ASL

[amit87]

HI guys.... I want the ASL button for my steering wheel but want to pay minimal.

This is quite hard to come by and I use speed limiter a lot in work hire cars.

When I get Bluetooth phone calls I ALWAYS pick up and hang up from the touch&go and not the steering wheel buttons.

So for £free I am thinking to switch couple pins around and set either the "call answer" or "call end" button to activate the speed limiter. What do you think?

PS great info.... could not be able to do myself without the above wiring diagrams.

If someone can find me a switch or a part number which I can try and ask toyota for, it would be better as I'm a massive OEM fan.

[Gagi]

Originally Posted by amit87

HI guys.... I want the ASL button for my steering wheel but want to pay minimal.

This is quite hard to come by and I use speed limiter a lot in work hire cars.

When I get Bluetooth phone calls I ALWAYS pick up and hang up from the touch&go and not the steering wheel buttons.

So for £free I am thinking to switch couple pins around and set either the "call answer" or "call end" button to activate the speed limiter. What do you think?

PS great info.... could not be able to do myself without the above wiring diagrams.

If someone can find me a switch or a part number which I can try and ask toyota for, it would be better as I'm a massive OEM fan.

First, I would like to strongly advise you to force yourself with usage of steering wheel phone commands. It was very stupid from Toyota to leave this touch screen phone commands available while the car is moving. But...
Of course, you can use one of these buttons, but you will have to remove one of two resistors on pcb and make a short connection on its place.
You can also modify your cruise control stalk, and that is completely free, as you would like it to be. And it works perfectly.
If you are the OEM fan, there is complete part China made that you just plug in place. There is no separate button as a part, you buy complete set of commands, together with wirings and connector. With this part you don't have to change place of ASL pin.