aluminum underpanel - Page 2 - Toyota Yaris Forums

turboyaris · 05-01-2007, 11:36 PM

using the best resource I had available to me.... the factory service manual, I did a little research, and it appears that the underpanels should be interchangeable from liftback to sedan, if the panel connects to the frame rail which I believe it does. Don't hold me to this, I would wait until I have the panel made up and try and fit it onto a liftback before I say for certain. However, the framerails are placed the same distance apart on the sedan and liftback, therefore I can't imagine why it wouldn't fit.

turboyaris · 04-30-2007, 12:07 AM

here is a picture of the panel http://www.yarisworld.com/forums/showthread.php?t=3807
i don't know if it would fit the sedan or not. I imagine that the points and all would be very similar. The design I am going to make will be for the sedan and I will then need to find a liftback in the area to see if it would fit or need modification.

*tk-421* · 05-02-2007, 12:39 AM

turboyaris: I'm actually more interested in the template that you made for the panel, since I might be able to get it fabricated locally... Shipping usually kills off every sweet deal for me (even GBs)... Prices really go up when shipping to Mexico, plus I gotta pay taxes.

Please PM me an offer on your template if you're interested. Of course. I'm only buying if the panel fits the hatchback with no issues, so I'll wait as long as it takes for you to confirm this. Take your time, bud!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: 12" Eclipse Aluminum Sub (SW8122 DVC)	Treyz	Items for Sale by private party	0	02-18-2007 05:35 PM
Stock Aluminum Rims on ebay	tiksman	Items for Sale by private party	7	10-15-2006 11:46 PM

05-01-2007, 11:36 PM	#1
turboyaris Drives: 2007 Yaris Sedan Join Date: Jan 2007 Location: Southern New Jersey Posts: 459	using the best resource I had available to me.... the factory service manual, I did a little research, and it appears that the underpanels should be interchangeable from liftback to sedan, if the panel connects to the frame rail which I believe it does. Don't hold me to this, I would wait until I have the panel made up and try and fit it onto a liftback before I say for certain. However, the framerails are placed the same distance apart on the sedan and liftback, therefore I can't imagine why it wouldn't fit.

04-30-2007, 12:07 AM	#2
turboyaris Drives: 2007 Yaris Sedan Join Date: Jan 2007 Location: Southern New Jersey Posts: 459	here is a picture of the panel http://www.yarisworld.com/forums/showthread.php?t=3807 i don't know if it would fit the sedan or not. I imagine that the points and all would be very similar. The design I am going to make will be for the sedan and I will then need to find a liftback in the area to see if it would fit or need modification.

05-02-2007, 12:39 AM	#3
tk-421 Super Moderator View User's Garage Drives: 5D-07-LB Join Date: Jan 2007 Location: Dagobah Posts: 4,263	turboyaris: I'm actually more interested in the template that you made for the panel, since I might be able to get it fabricated locally... Shipping usually kills off every sweet deal for me (even GBs)... Prices really go up when shipping to Mexico, plus I gotta pay taxes. Please PM me an offer on your template if you're interested. Of course. I'm only buying if the panel fits the hatchback with no issues, so I'll wait as long as it takes for you to confirm this. Take your time, bud!