About to install pair of cams but.....

[Jason@SportsCar]

You can certainly run cams with the stock ecu, you just wont see anywhere near the gains as you can with a tune. Double check the clearance when you install those cams, with the 9.5mm lift Jun cams we had to do a little machine work on the head so the lobes did not hit the casting.

[rabbito]

Originally Posted by Jason@SportsCar

You can certainly run cams with the stock ecu, you just wont see anywhere near the gains as you can with a tune. Double check the clearance when you install those cams, with the 9.5mm lift Jun cams we had to do a little machine work on the head so the lobes did not hit the casting.

thxz for the reply. i told the mechanic that i have piggyback ecu, feel free to program however he want the setting to be and he said this cams bolt-on for stock ecu...-_- so i guess ill install it and see what happens

Sent from my SM-N920C using Tapatalk

[Fluxtasy]

can't wait to see dyno charts

Originally Posted by rabbito

thxz for the reply. i told the mechanic that i have piggyback ecu, feel free to program however he want the setting to be and he said this cams bolt-on for stock ecu...-_- so i guess ill install it and see what happens

Sent from my SM-N920C using Tapatalk