Paint Code for Alloy Wheels?

[kimona]

195/60/15's are a good fitment. Waiting for the photos.

[06YarisRS]

Originally Posted by kimona

195/60/15's are a good fitment. Waiting for the photos.

I agree. I'm pretty sure that there will be no rubbing issues with the Penguin 13mm spacers and the 195's. I was running the 185/65R15 Michelins on the RS and there still looked to be some room. I have a 9:30AM appointment tomorrow. Hopefully they won't have an issue putting the 195's on a 5.5" wheel. I know some places won't install much other than what's posted on the door jamb.

[06YarisRS]

Originally Posted by kimona

Waiting for the photos.

For you, sir.

My camera lens does not really convey the width of the tires. They do seem wider in person. I really wish they made this alloy in 16" and a tad wider. The installer did cause one very small ding in the clearcoat near the center cap, but I mixed up a couple drops of clear and filled it. I expect that if the clearcoat had been fully cured, that may not have happened. Will sand and buff out later. Absolutely no damage to the edges of the rims. Overall, a pretty good installation, IMO.