LED light help

[Hoodyjay]

Originally Posted by IllusionX

Unplug the module then.

I've rewired the DRL to the fogs. I basically just tapped the light blue wire from the module, to the orange wire, and added a 100uf cap so it doesn't flicker the fog relay, and it's been working for the past 5+ years.

I'm not sure about those anti-flicker, but I'm sure adding a proper cap to the circuit will fix your issue with using DRL with your LED.

Sent from my CLT-L04 using Tapatalk

I tried unplugging the DRL relay under the steering column yesterday, it's like -22 degrees Celsius where I am and my hands were frozen lol. I couldn't get it out. I was thinking if I do get them out I can just turn the headlight switch halfway where only my yellow parking lights will turn on?

[IllusionX]

Originally Posted by Hoodyjay

I tried unplugging the DRL relay under the steering column yesterday, it's like -22 degrees Celsius where I am and my hands were frozen lol. I couldn't get it out. I was thinking if I do get them out I can just turn the headlight switch halfway where only my yellow parking lights will turn on?

They will. If you unplug the module, the OEM fog lights (if you have them) will also stop working.
The orange wire needs grounded to work (independently). The module keeps fogs working like OEM.

If you want to properly disable DRL, you need to cut the thick blue (iirc is light blue) from the module, then you can use the signal to power lights of your choice.

One day, one day I will pull the module out and take a picture of my modification. Hehe


What you can also do is wire up a relay, and turn on a set of lights on car start. You have many many options.

Also, not sure what the law says about DRL in Alberta, but Quebec SAAQ says they have to be stock location. Although no one gives a damn about it.

Sent from my CLT-L04 using Tapatalk

[Hoodyjay]

Originally Posted by IllusionX

They will. If you unplug the module, the OEM fog lights (if you have them) will also stop working.
The orange wire needs grounded to work (independently). The module keeps fogs working like OEM.

If you want to properly disable DRL, you need to cut the thick blue (iirc is light blue) from the module, then you can use the signal to power lights of your choice.

One day, one day I will pull the module out and take a picture of my modification. Hehe


What you can also do is wire up a relay, and turn on a set of lights on car start. You have many many options.

Also, not sure what the law says about DRL in Alberta, but Quebec SAAQ says they have to be stock location. Although no one gives a damn about it.

Sent from my CLT-L04 using Tapatalk

All those wire and relay talk got me confused af lol. I think I will just try to pull the relay again when it's slightly warmer. If I do get in shit, that relay is already hard enough to get out, I can't imagine putting it back in. I might just run with my headlights turned on fully even in the day. I imagine that it would lower its lifespan but oh well.