T Montague's 2zr swap - '08 m/t sedan some extra info

[CrankyOldMan]

Originally Posted by 06YarisRS

I'm not finding other locations in the car to mount gauges that are appealing to me.

During my supercharger build I played with a 2D laser cutter and mocked up a plastic gauge panel for the upper glovebox. It was just big enough for a ScanGauge II and two 55mm dials, but I never completed it. It's less than ideal on the track since you'd have to look that far down to see anything but it could be ok for less immediate information. There's a thread around here somewhere with my template...

[06YarisRS]

Originally Posted by CrankyOldMan

During my supercharger build I played with a 2D laser cutter and mocked up a plastic gauge panel for the upper glovebox. It was just big enough for a ScanGauge II and two 55mm dials, but I never completed it. It's less than ideal on the track since you'd have to look that far down to see anything but it could be ok for less immediate information. There's a thread around here somewhere with my template...

Sounds interesting. I'll definitely have a look around for that thread. Thanks.

[CrankyOldMan]

Originally Posted by 06YarisRS

Sounds interesting. I'll definitely have a look around for that thread. Thanks.

Found it. Looks like I never posted the schematics. I'll take a look in my archives tonight-ish.