T Montague's 2zr swap - '08 m/t sedan some extra info

[tmontague]

Excellent I appreciate your input having used it first hand. How did the install go assuming you installed it when the windshield was already installed on the car?

I've done a fair amount if wiring on cars in the past but I'm curious if you wired it directly off the battery with an inline fuse or what you found was the best?

[tsk94]

Originally Posted by tmontague

Excellent I appreciate your input having used it first hand. How did the install go assuming you installed it when the windshield was already installed on the car?

I've done a fair amount if wiring on cars in the past but I'm curious if you wired it directly off the battery with an inline fuse or what you found was the best?

Yes, the windshield was in the car when it was installed. The install went fine. It comes with good instructions, if you're patient and take your time it will all go smoothly.

I can't remember exactly for the wiring, it wasn't directly off the battery though. I believe we used a power wire from a module we unplugged and removed during the build. Spliced into the power wire and then used an existing ground. In the instructions to provides a few options for wiring - we followed one of them and it worked perfectly! I may be wrong but I believe this is how we did it. That being said there are many options you can do to get power.