yaris tachometer installation tutorial if you need <3

[Ecefour]

Thanks for the tutorial! So, i dont want to touch the wiring in my car. I just like to have everything easily reversible. But In theory I could just buy a male tachometer connector and wire in the tachometer that way? Then it would easily removable.

I've looked online and I haven't been able to found an OBD tachometer that is JUST a tachometer. Most of them are HUDs that display RPM along with other information that I dont care about. Also the last HUD i tried had horrible latency.

[2010yarisHBbase]

Originally Posted by Ecefour

Thanks for the tutorial! So, i dont want to touch the wiring in my car. I just like to have everything easily reversible. But In theory I could just buy a male tachometer connector and wire in the tachometer that way? Then it would easily removable.

I've looked online and I haven't been able to found an OBD tachometer that is JUST a tachometer. Most of them are HUDs that display RPM along with other information that I dont care about. Also the last HUD i tried had horrible latency.

I understand not wanting to touch the wiring and I only did it because I learned enough and trusted myself not to fk it up :D ofc there are lots of obd connected tachs but those like you experienced are very laggy and delayed with the tach information because it is through the obd. and I have yet to see a long lasting one that is affordable and efficient. That's why I decided to tap into the wires because I wanted instant feed back and it was worth it. everything I did was reversible esp since I only glued the tach with cheap double sided tape. The wiring is also removable but ofc there is always that lil bite mark where the connecters bit.