newby enquiry

[sh0rtlife]

https://www.yarisworld.com/forums/sh...ad.php?t=33750

[ShadowRabbit]

Originally Posted by sh0rtlife

https://www.yarisworld.com/forums/sh...ad.php?t=33750

The link doesn’t work for me anymore. Does anyone else have the guide? I took a look at my 2008 sedan yesterday, and there were wires where I wasn’t expecting them (in the spots to put the wire to the ECU and the wire to ground) but I don’t have a wire coming from the ECU, so I don’t want to mess with it blindly. Thanks for any help!

[sh0rtlife]

Originally Posted by ShadowRabbit

The link doesn’t work for me anymore. Does anyone else have the guide? I took a look at my 2008 sedan yesterday, and there were wires where I wasn’t expecting them (in the spots to put the wire to the ECU and the wire to ground) but I don’t have a wire coming from the ECU, so I don’t want to mess with it blindly. Thanks for any help!

the website will sometimes "hiccup" try the link till it works...its still a good lin k i just double checked

wait if you have an 08 and it has the spots filled on the ECU than you dont need to run wires...your a plug n play..ie put in the CC unit and the jump cable at the snail, and verify the plug on the other side of the snail is in place

the link will clear that up about some of the 08+ cars having "most" of the CC stuff pre-installed to the point of only needing to plug the CC unit in and a matching cable..no "non factory" additions

[ShadowRabbit]

Originally Posted by sh0rtlife

the website will sometimes "hiccup" try the link till it works...its still a good lin k i just double checked

wait if you have an 08 and it has the spots filled on the ECU than you dont need to run wires...your a plug n play..ie put in the CC unit and the jump cable at the snail, and verify the plug on the other side of the snail is in place

the link will clear that up about some of the 08+ cars having "most" of the CC stuff pre-installed to the point of only needing to plug the CC unit in and a matching cable..no "non factory" additions

I’m so sorry! Let me try to clarify. I can see the thread, but the pdf link sends me to a French blog. I did find some other posts from before that guide was put together after searched a while.

So the wires I have are the blue and brown in the connector D3 under my steering column. What I do not have is a wire in the ECM pin 40 spot. I don’t know how to connect a wire from the ECM at this point, because I wasn’t expecting the wires that are in connector D3. I just don’t want to mess up my poor car, haha!