NST Yaris cabin Short shift kit install

[sh0rtlife]

i hadnt actualy bothered looking at a yaris shifter..so i thank you for the pic's..seems to be very similar to the old dodge k cars and neon setup to which i know exactly how to make super short throw shifters as its just a matter of heating the "ball" and sliding it up the shaft a bit...since were on the hunt for a second yaris(which may end up being a XB) this is usefull info

the last 2 short throws i built were down riht silly ..one being in an 89 dodge turbo caravan there was very little little travel in it at most 5 inches at the grip from 1-2...the "updated" version (same parts different body) i did for my lloyd has about 2 inches from 1-2..its really more of a joystick

[Compeer]

Originally Posted by sh0rtlife

i hadnt actualy bothered looking at a yaris shifter..so i thank you for the pic's..seems to be very similar to the old dodge k cars and neon setup to which i know exactly how to make super short throw shifters as its just a matter of heating the "ball" and sliding it up the shaft a bit...since were on the hunt for a second yaris(which may end up being a XB) this is usefull info

the last 2 short throws i built were down riht silly ..one being in an 89 dodge turbo caravan there was very little little travel in it at most 5 inches at the grip from 1-2...the "updated" version (same parts different body) i did for my lloyd has about 2 inches from 1-2..its really more of a joystick

The yari one is on a spline theres maybe 1.5" of spine there you could move it on. The actual shaft is different angles too.

But yeah I seen vids where they take them out and modify them but for 80usd shipped with the bushings and everything I didnt think it was worth mucking around with it. Hopefully NST still does the engine bay ones because that reduces throw to about 50% of original.