Can the 2NZ-FE use the same performance parts than 1NZ-FE?

[Centurion2200]

Originally Posted by CASTREX

Intake won't. Is in a totally different position.

The intake on the 2NZ and the 1NZ is exactly in the same position.....

The 2NZ-FE isn't the same 1.3 engine from United States.....



I found in some parts websites that the exhaust gaskets are the same for both NZ's......

And the big question....... TURBO???....the zpi will work?

[CASTREX]

Dude, i'm not from the states. I'm just a little bit north from you.

and btw I have 2 Yarisss 2007 in my garage. A LB 1.3 2NZ and a Sedan 1.5 1NZ

So I will like to see you fit a 1.5L intake on a 1.3L


Well... at least that your are talking about the 1NZ on the old echo wich I think has a different intake position.

[CASTREX]

This is the intake on the 1NZ.

Do you have a picture of the 2NZ engine bay?

I don't think the turbo kit will fit on your car... (as a bolt on) at least the piping. You will also have to do a new tune for the emanage.

[ZPIracing]

Originally Posted by Centurion2200

The intake on the 2NZ and the 1NZ is exactly in the same position.....

The 2NZ-FE isn't the same 1.3 engine from United States.....



I found in some parts websites that the exhaust gaskets are the same for both NZ's......

And the big question....... TURBO???....the zpi will work?

Post a pic of the engine bay. Toyota typically keeps this stuff the same so i would think it will fit with minimal mods. Not sure about the ecu the wiring would be a little different but i think the tune would be close.

Thanks.

[Centurion2200]

it looks exactly the same as the pic above..... i'll post some pics as soon i get home....

Yaris here in panama have the same engine that the echos....

[weaponrcamry]

Im pretty sure that the intake wont fit. Unless you custom make the tube, and you will have to make a MAF adapter their are different as well as the sensors.Yea toyota usually make things compatible without to much difficulty. The only reason why alot of things are the same because of their engine codes. For example


5s-3s
2jz-1jz
1MZ-3MZ

7M, 5M etc.

And the same with honda, most of their parts are compatible.
Since the yaris uses the NZ design, I would most likely say they will wit with minimal modification.