JDM folding mirrors with signals............

[ucsmfu]

Originally Posted by jcboy

I have no idea TBH, let alone we dont have the same yaris anymore after this model (mine).

Re ease of install, you actually can tap from the front signals as how they are originally wired. This way you can get 2 pairs of equal length wires to run from the door, through the fenders and then to the engine bay/wires going to the headlight.

If you want to be anal about it (cleaner install, like how i did it), you can ask scott or look around where your turn signals +12V are in the Junction Box.

icic, thanks :)

Scott, do you think these will fit ? http://www.ebay.com/itm/YARIS-2012-L...item19d5c8ed96

Also, is the wiring fairly easy ? just tap it into turn signal ?

Thanks

[GPBIG]

Do you have a diagram of the instalation of the jdm mirrors? Mine is a 5 pin 2 pin and I need help in how it close again with the switch.

[jcboy]

the 2 pin is definitely the turn signal. that's interchangeable unless it's aftermarket or uses LED.

the 5-pin one's PINs#4 and 5 are for the retract. Pins 4 and 5 are the bottom ones at the connector (the top being the ones closest to the latch). these 2 are also "almost" interchangeable, since the switches function is to put the +12V to either wire depending on whether retracting or opening the mirrors.

HTH.

[Majestic]

Wow very nice guys, I would like the same mirrors with turn signal for my car. Seeing that Iam in south africa I would like to know where can I find those mirrors, I dnt want those cheap quality ones that don't fit properly and fade. If I could get those from a scionxd it would be great. Iam near Lesotho would I find a scion there or do I need to order from the US. I also saw here in my country a yaris sedan with side mirror turn signals the model could be upto 2012. Guys any info will be much appreciated