ebay foglight kits

[Absolutely Red 12]

Originally Posted by CPALK719

attempting my ebay fog light install today !!! kit came in yesterday, it appears decent quality. my only problem now is the wiring harness, is somewhat of confusing.

The part of the harness that should be fished through the cabin of the vehicle into the dash of the car, it just seems too short to do so...


anybody have any info to help me out here?

I PMd you.

[Lerico]

Originally Posted by CPALK719

attempting my ebay fog light install today !!! kit came in yesterday, it appears decent quality. my only problem now is the wiring harness, is somewhat of confusing.

The part of the harness that should be fished through the cabin of the vehicle into the dash of the car, it just seems too short to do so...


anybody have any info to help me out here?

If you have the 3rd gen Yaris, the factory fog light harness should be built right in and is taped behind the bumper cover. You do not need to use the included wiring harness.

Here is what I did:
- Removed the bumper cover
- Installed the lights
- Plugged the lights to the factory fog light connectors
- Installed the bumper cover

Went inside my car:
- Removed the lower steering column cover (3 screws)
- Found the headlight control stalk connector
- Used a jumper wire and jump pin 3 and 4, turned on ignition and turned on headlight, the fog light turned on, together with the instrument panel fog light indicator
- All went well, installed the eBay fog light switch by tapping 2 of the wires from the switch onto pin 3 and 4. I have to cut the switch off the eBay wiring harness. My 3rd gen do not need to use the relay, relay controlled by the ECU.

That was it.

[CPALK719]

ughhh still havent tried it yet.... i hate how work consumes all time.

[Rammy]

I bought a pair off of ebay and it was all knock off material. I guess it was ok for $74 including HIDs and shipping. But Im just not sure about the wiring. I guess I could just go for some trial and error but its a little too shady. I put the actual lights in last night and Im going to try the wiring right now. BTW, I have no electrical experience so I hope I get this right. The saying "You get what you pay for" is true.

[screenprintr]

Lerico's instructions sound pretty simple.

Lerico, which lights did you buy, and if you don't mind me asking, where did you buy them?