a-pillar gauge pod - Page 2 - Toyota Yaris Forums

cali yaris · 06-07-2007, 02:59 AM

http://www.glowshiftdirect.com/index...ROD&ProdID=193

Autometer also has a basic tach 2 1/6"

Sway84 · 06-07-2007, 08:31 AM

of course im painting the pillar lol...ewww...i aint gonna get something i cant match lol...

OxyG3nE · 06-07-2007, 07:19 PM

i want to see it first cuz im not sure about the look it will give.. and i also have no idea how to wire this ..

dvlnblkdrs · 06-13-2007, 12:46 AM

how do u remove those pillar pieces.. i want to paint more.. that gray is hideous! it will all be green as soon as u tell me how! lol please & thank u in advance

punch · 06-13-2007, 11:16 AM

the pillers should just pop off, no tools required.

Sway84 · 06-13-2007, 11:49 AM

it allll pops right out, you just need to use a flat head skrewdriver lol and dont be shy with popping it out

dvlnblkdrs · 06-13-2007, 06:17 PM

they go back on alright too? i had some issues with my stereo unit cover fitting just right... are the back ones that easy too? i dont want any grey...

cali yaris · 06-16-2007, 04:24 PM

should say on their site what it fits. The one I saw was for the liftback/3-door

I'll have some pics to show in a week with my install of three gauges.

eijikikimaru · 06-16-2007, 08:06 PM

I saw today the gauge installed and it looked nice! Complete that w/ guages inside the driverside glove compartment~ oh be so nice

ism3t · 06-16-2007, 08:07 PM

here are my custom a-pillars that i retrofitted from the ebay listing above. The pillar they sent didnt fit AT ALL. so i just chopped it down to use the pods, and then got them covered in suede. looks really good, but don't expect it to fit right over the stock pillar, and also, they look really cheap.
fresh out of the box.

TACH

then the chopping began, then the suede.

Before

After

Sway84 · 06-16-2007, 08:25 PM

what u mean it didnt fit?...like the whole pod was too long?...

ism3t · 06-16-2007, 08:27 PM

it is too short on 3 of the 4 corners, and it doesnt come down deep enough on the 4th. sorry i didnt take pics of it before the mods, but trust me when i say getting it is just the first step in a very long lame modding process. also check your gauges, my tach had the button to change the colors messed up so i have to contact them for a new one.

Sway84 · 06-16-2007, 08:37 PM

ughh... if life were like this you wouldnt need a visa

cali yaris · 06-16-2007, 08:56 PM

This was an eBay pod, not the Glowshift one, right?

Ended up very nice, the suede helps with all cosmetic challenges

Sway84 · 06-16-2007, 09:03 PM

yea cause i wanted to get the glowshift...and if there are these problems we may have a problem here lol...

Black Yaris · 06-16-2007, 09:50 PM

http://cgi.ebay.com/ebaymotors/06-07...QQcmdZViewItem
here is another one

Black Yaris · 06-16-2007, 09:51 PM

and just found the pillar with out the gauges
http://cgi.ebay.com/ebaymotors/06-07...QQcmdZViewItem

ASHRAF · 06-17-2007, 07:59 AM

any for the RHD cars?

06-07-2007, 08:31 AM	#20
Sway84 View User's Garage Drives: 07 Yaris HB Join Date: Apr 2007 Location: Toronto Ontario Canada Posts: 309	of course im painting the pillar lol...ewww...i aint gonna get something i cant match lol... __________________ Rice on, Rice Off Ron Cabading

06-13-2007, 11:49 AM	#24
Sway84 View User's Garage Drives: 07 Yaris HB Join Date: Apr 2007 Location: Toronto Ontario Canada Posts: 309	it allll pops right out, you just need to use a flat head skrewdriver lol and dont be shy with popping it out __________________ Rice on, Rice Off Ron Cabading

06-13-2007, 06:17 PM	#25
dvlnblkdrs Shush! View User's Garage Drives: 2007 toyota yaris Join Date: Jan 2007 Location: orange, ca Posts: 3,521	they go back on alright too? i had some issues with my stereo unit cover fitting just right... are the back ones that easy too? i dont want any grey... Last edited by dvlnblkdrs; 06-14-2007 at 04:12 AM.

06-16-2007, 04:24 PM	#26
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	should say on their site what it fits. The one I saw was for the liftback/3-door I'll have some pics to show in a week with my install of three gauges. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

06-16-2007, 08:25 PM	#29
Sway84 View User's Garage Drives: 07 Yaris HB Join Date: Apr 2007 Location: Toronto Ontario Canada Posts: 309	what u mean it didnt fit?...like the whole pod was too long?... __________________ Rice on, Rice Off Ron Cabading

06-07-2007, 02:59 AM	#19
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	http://www.glowshiftdirect.com/index...ROD&ProdID=193 Autometer also has a basic tach 2 1/6"

06-07-2007, 07:19 PM	#21
OxyG3nE Drives: Toyota Yaris 2007 Join Date: Jul 2006 Location: Montreal , Quebec , Canada Posts: 373	i want to see it first cuz im not sure about the look it will give.. and i also have no idea how to wire this ..

06-13-2007, 12:46 AM	#22
dvlnblkdrs Shush! View User's Garage Drives: 2007 toyota yaris Join Date: Jan 2007 Location: orange, ca Posts: 3,521	how do u remove those pillar pieces.. i want to paint more.. that gray is hideous! it will all be green as soon as u tell me how! lol please & thank u in advance

06-13-2007, 11:16 AM	#23
punch Drives: 2007 Yaris Sedan "D" package Join Date: May 2006 Location: Barrie, ontario Posts: 852	the pillers should just pop off, no tools required.

06-16-2007, 08:06 PM	#27
eijikikimaru Q(','Q) View User's Garage Drives: 3dr Meteroite Join Date: Jan 2007 Location: So. CaL Posts: 399	I saw today the gauge installed and it looked nice! Complete that w/ guages inside the driverside glove compartment~ oh be so nice

06-16-2007, 08:07 PM	#28
ism3t YarVitz Drives: 07' Yaris Liftback Join Date: Sep 2006 Location: Southern California Posts: 222	here are my custom a-pillars that i retrofitted from the ebay listing above. The pillar they sent didnt fit AT ALL. so i just chopped it down to use the pods, and then got them covered in suede. looks really good, but don't expect it to fit right over the stock pillar, and also, they look really cheap. fresh out of the box. TACH then the chopping began, then the suede. Before After

06-16-2007, 08:27 PM	#30
ism3t YarVitz Drives: 07' Yaris Liftback Join Date: Sep 2006 Location: Southern California Posts: 222	it is too short on 3 of the 4 corners, and it doesnt come down deep enough on the 4th. sorry i didnt take pics of it before the mods, but trust me when i say getting it is just the first step in a very long lame modding process. also check your gauges, my tach had the button to change the colors messed up so i have to contact them for a new one.

06-16-2007, 08:37 PM	#31
Sway84 View User's Garage Drives: 07 Yaris HB Join Date: Apr 2007 Location: Toronto Ontario Canada Posts: 309	ughh... if life were like this you wouldnt need a visa __________________ Rice on, Rice Off Ron Cabading

06-16-2007, 08:56 PM	#32
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	This was an eBay pod, not the Glowshift one, right? Ended up very nice, the suede helps with all cosmetic challenges __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

06-16-2007, 09:03 PM	#33
Sway84 View User's Garage Drives: 07 Yaris HB Join Date: Apr 2007 Location: Toronto Ontario Canada Posts: 309	yea cause i wanted to get the glowshift...and if there are these problems we may have a problem here lol... __________________ Rice on, Rice Off Ron Cabading

06-16-2007, 09:50 PM	#34
Black Yaris der Zeck View User's Garage Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006 Location: Toledo, OH Posts: 5,231	http://cgi.ebay.com/ebaymotors/06-07...QQcmdZViewItem here is another one __________________

06-16-2007, 09:51 PM	#35
Black Yaris der Zeck View User's Garage Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006 Location: Toledo, OH Posts: 5,231	and just found the pillar with out the gauges http://cgi.ebay.com/ebaymotors/06-07...QQcmdZViewItem __________________

06-17-2007, 07:59 AM	#36
ASHRAF Scubie Du View User's Garage Drives: '10 SWP STi/'09 Escalade Join Date: Nov 2006 Location: Houston, TX Posts: 350	any for the RHD cars? __________________ -AJ '05 Black Toyota Avalon Limited - Saudi Arabia '06 Black Sand Pearl Toyota Yaris YR - Australia '08 Fiji Blue Pearl Honda Civic Mugen Si - US '08 Lightning Red Subaru Impreza WRX STi - US '09 Diamond White Pearl Cadillac Escalade - US (current) '10 Satin White Pearl Subaru Impreza WRX STi - US (current) '11 Yaris?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gauge Pod for Liftback?	eight_heads	General Yaris / Vitz Discussion	2	06-07-2007 11:41 AM
Fishing an AV wire down B pillar	redyaris	In Car Entertainment + Electronics (audio / video / alarm)	6	03-10-2007 07:17 PM
temp gauge?	gaf99	General Yaris / Vitz Discussion	10	01-15-2007 11:43 PM
Fuel / Temp / Mileage Gauge - Special LED Readings?	bigsky2	General Yaris / Vitz Discussion	3	05-31-2006 10:04 AM
Temperature gauge	fearturtle44	General Yaris / Vitz Discussion	1	05-18-2006 09:54 AM