My 2011 Vitz - Page 20 - Toyota Yaris Forums

yarisugi · 01-30-2015, 12:39 PM

I have yet to see an aftermarket single projector headlight for the Yaris.
Looks like you're pretty good at DIY. So you might want to give it a shot!
Do you have a spare set of headlights to play around with?
Sevenism from HIDPlanet did a nice write up on his customer's Yaris retrofit.
Hope this might help if you decide on a DIY.

EDIT: I forgot about PETERPOOP's write up that was informative as well.

TerenceCruz · 01-30-2015, 04:30 PM

Quote:

Originally Posted by yarisugi

I have yet to see an aftermarket single projector headlight for the Yaris.
Looks like you're pretty good at DIY. So you might want to give it a shot!
Do you have a spare set of headlights to play around with?
Sevenism from HIDPlanet did a nice write up on his customer's Yaris retrofit.
Hope this might help if you decide on a DIY.

EDIT: I forgot about PETERPOOP's write up that was informative as well.

Ahh man, I was on Instagram talking to some guys from Indonesia, I guess they got theirs from a supplier called Bixenon, but I'm pretty sure you can't buy the headlights like that.. But thanks man, I try! If I get a spare set of headlights I might try it out. I read PETERPOOP's write up, and I just feel like I would get so lost without someone there to help hahah.

TerenceCruz · 01-30-2015, 04:48 PM

Quote:

Originally Posted by yarisugi

I have yet to see an aftermarket single projector headlight for the Yaris.
Looks like you're pretty good at DIY. So you might want to give it a shot!
Do you have a spare set of headlights to play around with?
Sevenism from HIDPlanet did a nice write up on his customer's Yaris retrofit.
Hope this might help if you decide on a DIY.

EDIT: I forgot about PETERPOOP's write up that was informative as well.

Btw, Sevenism's customer got exactly what I wanted *drool* That's perfect..

TerenceCruz · 01-30-2015, 04:33 PM

Oh yeah guys, some other small updates. Kind of. Lol

Added a 10mm hub spacer, and washers on the rear lower hub bolts to get negative camber. So far so good.

Also added my bumper quick release

MiSFiTx87 · 02-01-2015, 02:38 AM

vitz looking good as always. is easy to install the bumper quick release?

TerenceCruz · 02-01-2015, 03:49 PM

Quote:

Originally Posted by MiSFiTx87

vitz looking good as always. is easy to install the bumper quick release?

Thanks man! Yes it is. Watched a quick 2 minute video on youtube to get the right size drill bit. Only hard part was figuring out how far to space the two out to get the band tight enough.

TerenceCruz · 02-01-2015, 08:38 PM

Moar pics for sh*ts and giggles :D Sorry for the picture wh0ring lol.

WorkTL · 02-14-2015, 03:07 PM

Sick! I need that camber in the rear... how did you get it so stanced? -4?

yarisugi · 02-15-2015, 03:10 AM

Answer on post #351 - washers on bottom half of hub bolts.

TerenceCruz · 02-15-2015, 09:21 PM

Quote:

Originally Posted by WorkTL

Sick! I need that camber in the rear... how did you get it so stanced? -4?

Thanks a lot man! And yes as Sugi said, 3 washers each on the two lower hub bolts. I added an extra washer on the left front side hub bolt in an attempt to fix toe in.

Quote:

Originally Posted by yarisugi

Answer on post #351 - washers on bottom half of hub bolts.

Thanks for that Sugi!

TerenceCruz · 02-15-2015, 09:27 PM

Also, Valentine's Day gift from my girlfriend. Sorry I can't resize on my phone, I'll do it later lol. Big picture printed of my car, along with a mini version haha. Too bad they don't come in 2 doors, but I love it regardless! She's the best.

yarisugi · 02-17-2015, 06:58 PM

I like that framed picture of your car!
Who took the shot?

ern-diz · 02-17-2015, 08:04 PM

Car is looking really nice, TerenceCruz.

TerenceCruz · 02-18-2015, 01:22 AM

Quote:

Originally Posted by yarisugi

I like that framed picture of your car!
Who took the shot?

Thanks Sugi! She took it, just edited it slightly, then printed it out at Kinkos.

Quote:

Originally Posted by ern-diz

Car is looking really nice, TerenceCruz.

Much appreciated man, thank you!

TerenceCruz · 03-17-2015, 01:06 AM

Hey guys, haven't updated this in a while. No real updates, just been driving the car and enjoying it. Still saving for my 10k/8k Swift springs, just had to take care of some more important stuff first. Anyways, here are some pictures :) I still have to install my second pair of camber bolts in the front, and drop the front a little bit more too when I get the Swift springs. Thanks for looking!

WorkTL · 03-17-2015, 06:25 AM

I love it

ern-diz · 03-17-2015, 04:16 PM

I've been considering a front lip like the one you have, Terence. I think it matches the mud flaps nicely.

TerenceCruz · 03-18-2015, 01:31 AM

Quote:

Originally Posted by WorkTL

I love it

Thanks so much!

Quote:

Originally Posted by ern-diz

I've been considering a front lip like the one you have, Terence. I think it matches the mud flaps nicely.

Thank you, man! I love the lip, it doesn't compare to the JDM RS front lip, but hey, $10 for a decent looking lip is fine with me. For now, of course haha. I actually was considering taking off the mud flaps since they're kind of small compared to the width of the rim, but I don't know yet haha.

01-30-2015, 12:39 PM	#1
yarisugi やりすぎだ～ View User's Garage Drives: Me: Nuts: Join Date: Nov 2008 Location: ハワイ Posts: 2,041	I have yet to see an aftermarket single projector headlight for the Yaris. Looks like you're pretty good at DIY. So you might want to give it a shot! Do you have a spare set of headlights to play around with? Sevenism from HIDPlanet did a nice write up on his customer's Yaris retrofit. Hope this might help if you decide on a DIY. EDIT: I forgot about PETERPOOP's write up that was informative as well. Last edited by yarisugi; 01-30-2015 at 12:57 PM.

01-30-2015, 04:33 PM	#4
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Oh yeah guys, some other small updates. Kind of. Lol Added a 10mm hub spacer, and washers on the rear lower hub bolts to get negative camber. So far so good. Also added my bumper quick release Last edited by TerenceCruz; 01-31-2015 at 05:08 PM.

02-15-2015, 09:27 PM	#11
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Also, Valentine's Day gift from my girlfriend. Sorry I can't resize on my phone, I'll do it later lol. Big picture printed of my car, along with a mini version haha. Too bad they don't come in 2 doors, but I love it regardless! She's the best. Last edited by TerenceCruz; 02-18-2015 at 01:21 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2010 Vitz RS Modellista Completed Car	Vitz Rs Modellista	Photo-Video-Media Gallery	38	11-18-2014 01:25 PM
2012 Vitz from the 2011 Tokyo Auto Salon	CTScott	Third Gen Yaris General Discussion	14	02-10-2011 09:06 AM
Is UA-NCP13 1.5L Manual Trans a Vitz RS?	WesSunday	General Yaris / Vitz Discussion	1	11-28-2010 11:47 AM
Newly refreshed 2011 Toyota Corolla	Kal-El	Off-topic / Other Cars / Everything else Discussions	23	11-27-2010 01:57 PM
A German Yaris/Vitz/Echo ;)	we-to-11	Photo-Video-Media Gallery	5	06-27-2007 09:26 PM

02-01-2015, 02:38 AM	#5
MiSFiTx87 Drives: CS1 Join Date: Mar 2013 Location: 661 SoCal Posts: 107	vitz looking good as always. is easy to install the bumper quick release?

02-01-2015, 08:38 PM	#7
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Moar pics for sh*ts and giggles :D Sorry for the picture wh0ring lol.

02-14-2015, 03:07 PM	#8
WorkTL View User's Garage Drives: 2013 Yaris LE Join Date: Sep 2014 Location: SoCal Posts: 216	Sick! I need that camber in the rear... how did you get it so stanced? -4?

02-15-2015, 03:10 AM	#9
yarisugi やりすぎだ～ View User's Garage Drives: Me: Nuts: Join Date: Nov 2008 Location: ハワイ Posts: 2,041	Answer on post #351 - washers on bottom half of hub bolts.

02-17-2015, 06:58 PM	#12
yarisugi やりすぎだ～ View User's Garage Drives: Me: Nuts: Join Date: Nov 2008 Location: ハワイ Posts: 2,041	I like that framed picture of your car! Who took the shot?

02-17-2015, 08:04 PM	#13
ern-diz View User's Garage Drives: 2007 Liftback Join Date: Sep 2007 Location: CA all day Posts: 3,794	Car is looking really nice, TerenceCruz.

03-17-2015, 01:06 AM	#15
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Hey guys, haven't updated this in a while. No real updates, just been driving the car and enjoying it. Still saving for my 10k/8k Swift springs, just had to take care of some more important stuff first. Anyways, here are some pictures :) I still have to install my second pair of camber bolts in the front, and drop the front a little bit more too when I get the Swift springs. Thanks for looking!

03-17-2015, 06:25 AM	#16
WorkTL View User's Garage Drives: 2013 Yaris LE Join Date: Sep 2014 Location: SoCal Posts: 216	I love it

03-17-2015, 04:16 PM	#17
ern-diz View User's Garage Drives: 2007 Liftback Join Date: Sep 2007 Location: CA all day Posts: 3,794	I've been considering a front lip like the one you have, Terence. I think it matches the mud flaps nicely.