Prepparing a Yaris for FSP (Solo 2)

[Th3 Hatch]

Drew runs a 275 on an 8" wheel for autox on the STi.

now that I've got russell it's time to start prepping for FSP.

suspension, wheels, another set of wheels w/ r-comps, and seats.

[Russelt3hPirate]

we test fit the 15x7 +23mm and 205/55 15s from my buddies xA last night.

got some photos, it pokes just a little too much for my taste.

although with some more camber it might be ok.

I love how the yaris has ZERO fender lip!

once we get the car on it's suspension then we'll be test fitting again and ordering up some street wheels for Russell :D

[Go4th]

[Russelt3hPirate]

the car is lowerd, and we're going to test fit the 15s again.

we've decided on street wheels but the wait is about to start to get them :)

[NepsGD3]

Originally Posted by Russelt3hPirate

Is any one prepped (properly) for SCCA Solo2 Autox Class FSP?

My good friend is running his xA in FSP and doing very well.

Obviously there isn't much to be had with power, but Intake and Exhaust will help.

so I'm looking at the following

Wheels
R-comps
Springs
Struts (adjustable)
Strut Tower Bars
Anti Sway Bars

looking for Ideas, opinions, specific brands/parts ect.

I currently Autox a BSP Prepped STi, and my girlfried will be campaigning the yaris. :)

hey what color is your freinds XA...is it the white one with bronze rims...i have talked to a guy at the Equipe Rapide events that runs a XA in FSP ( most likley the same guy)...he looks real good out there

[Russelt3hPirate]

yeah he's good.

He's on the boards here.

a little update on the car.

we've got SilkRoad Coils and some 15x7 RE30s.

now we just need to see how russell does at the autox :)

[anonymous user]

I've been giving this some thought, currently driving a subaru in Street modified.
My main deterrent in FSP with the yaris is POWER. I don't know if the intake manifold is legal in that class if it ever makes production. Also, my region has two people running in FSP. An accord and a BMW. Both cars (well both drivers) are fast as hell. To be competetive with them i think requires some more power. I don't think handling is this cars downfall as much as it's lack of torque or horsepower.

[HTM Yaris]

The Yaris does lack power . A helical LSD in a Yaris would make it a giant killer .

Here are both of my Yari at the Autox

http://s208.photobucket.com/albums/b...MyMovie1-2.flv

http://s208.photobucket.com/albums/b...nt=YarisIX.flv

[anonymous user]

Originally Posted by HTM Yaris

The Yaris does lack power . A helical LSD in a Yaris would make it a giant killer .

Here are both of my Yari at the Autox

http://s208.photobucket.com/albums/b...MyMovie1-2.flv

http://s208.photobucket.com/albums/b...nt=YarisIX.flv

Excellent! Do you mind if i PM you so as not to derail the O.P. thread?

[HTM Yaris]

I don't mind if you PM me .....

[WolfWings]

Yeah, I was working towards prepping my Yaris for FSP, decided not to bother though it was a blast the few times I went and did it. Enough low-end torque to avoid shifting in and out of 2nd constantly will save your transmission if you can afford to build that route.

[mojoyaris]

I haven't been able to read the whole forum, but if you run the V710's or wider Hoosiers on 13 x 8's you'll get better gearing in the car and lighter rims. My Lenso's are under 9lbs each and Second gear is much better than running on 15's. It helps with the tighter 2nd gear turns.

I ran at the Porsche Club event last weekend and had a blast on old V710's (rubber was a bit hard), but it did relatively well PCA March 30 event
Alot of cars at this event ran R-comps. Especially the Miata's. Normally it's just Porsches and a few other cars, but this was kinda like an invitational for the various groups in our region. A friendly contest of the clubs of sorts.

A clip of the Yaris at the event with some morning runs, ebrake fun, spinouts and the last run of the day which was my best time for 8th out of 50 drivers (note: one guy drove two cars which didn't count).
Yaris at PCA event

[anonymous user]

Originally Posted by mojoyaris

I haven't been able to read the whole forum, but if you run the V710's or wider Hoosiers on 13 x 8's you'll get better gearing in the car and lighter rims. My Lenso's are under 9lbs each and Second gear is much better than running on 15's. It helps with the tighter 2nd gear turns.

I ran at the Porsche Club event last weekend and had a blast on old V710's (rubber was a bit hard), but it did relatively well PCA March 30 event
Alot of cars at this event ran R-comps. Especially the Miata's. Normally it's just Porsches and a few other cars, but this was kinda like an invitational for the various groups in our region. A friendly contest of the clubs of sorts.

A clip of the Yaris at the event with some morning runs, ebrake fun, spinouts and the last run of the day which was my best time for 8th out of 50 drivers (note: one guy drove two cars which didn't count).
Yaris at PCA event

Nice results. There are a lot of chinese where you live, eh?

[ozmdd]

Threadjacking, I know, but tell your buddy in the xA that he'd probably improve his times if he turned off his radio, quit talking to his passenger and kept both hands on the wheel (never hand-over-hand or 1-hand). Some very basic AutoX stuff, and focus is everything in AutoX. Cheers!

[mojoyaris]

Yes there are a few Chinese and Asians in the Vancouver area.