Carbon Fiber Wrap...Finish - Toyota Yaris Forums

jamal1984 · 07-17-2012, 10:52 PM

Ok. It's Finished at least for me.
Not 100% Wrap all the way, i left a few out for contrast.
here is few quick pictures. More details pictures tomorrow.

mazilla · 07-17-2012, 11:51 PM

Good job on the wrap, I might like that front fender bare too so it matches the rear and keep the contrast flowing...but that's just me, I'm kinda ADD when it comes to symmetry.

jamal1984 · 07-18-2012, 12:28 AM

Quote:

Originally Posted by mazilla

Good job on the wrap, I might like that front fender bare too so it matches the rear and keep the contrast flowing...but that's just me, I'm kinda ADD when it comes to symmetry.

yes, my gf told me so too, i'll consider this. thanks

Betrivent · 07-18-2012, 12:39 AM

The weave doesn't seem to be all the same direction..

jamal1984 · 07-18-2012, 12:49 AM

Quote:

Originally Posted by Betrivent

The weave doesn't seem to be all the same direction..

i talked about this in the other thread.

jamal1984 · 07-18-2012, 12:51 AM

weave all the same from front bumber, doors, and back bumber. Front Fenders and Hood are difference.
I did this as a purpose to show it to my customers.

why? · 07-18-2012, 10:20 AM

symmetry is boring. i like it the way it is, good job. people are so picky sometimes.

Golddeenoh · 07-18-2012, 11:04 AM

that has got to add like, 500 hp :D
I like the look, reminds me of someone replacing everything they could get their hands on with carbon fiber then rocking it like that.

jamal1984 · 07-18-2012, 11:52 AM

thanks

jamal1984 · 07-18-2012, 11:52 AM

Quote:

Originally Posted by Golddeenoh

that has got to add like, 500 hp :D
I like the look, reminds me of someone replacing everything they could get their hands on with carbon fiber then rocking it like that.

my yaris is 1000lbs lighter now. hahahha

TickleTimeTim · 07-18-2012, 12:13 PM

so what was the biggest single piece of wrap you needed? was it for the roof?
i like it

ilikerice · 07-18-2012, 12:38 PM

I bet it was the front bumper

jamal1984 · 07-18-2012, 02:45 PM

Quote:

Originally Posted by TickleTimeTim

so what was the biggest single piece of wrap you needed? was it for the roof?
i like it

yes front bumper, i used 60x100 and cut 23x100 for the back bumper and 37x100 for the front bumper

KCALB SIRAY · 07-18-2012, 02:54 PM

You're girlfriend told you about his ADD?

...suspect

Nice job, I dig it!!

Quote:

Originally Posted by jamal1984

yes, my gf told me so too, i'll consider this. thanks

TickleTimeTim · 07-18-2012, 03:05 PM

total price of wrap? where did you get it?

jamal1984 · 07-18-2012, 05:15 PM

here is a few more pictures.

jamal1984 · 07-18-2012, 05:19 PM

3M Dinoc or 3Mij380cv3 for front bumper and back bumper due to it's high stretch capable, you can use cheaper material for doors and fenders.
Prices? anywhere from $400 - $800 dollars depend on the material.
Or You can get away with the one i'm using for about $300 dollars but it's get thinner when you over stretch it, i scratches a few places here and there when i'm put the headlights back on......

david_827 · 07-18-2012, 05:47 PM

wow, that looks nice, btw out of curiosity, what %tint do u have?

07-17-2012, 11:51 PM	#2
mazilla advocatus diaboli Drives: 07 Yaris hatch Join Date: Mar 2011 Location: San Jacinto California Posts: 1,126	Good job on the wrap, I might like that front fender bare too so it matches the rear and keep the contrast flowing...but that's just me, I'm kinda ADD when it comes to symmetry. __________________ -Type 07 FFL- My odometer 03/11 http://i205.photobucket.com/albums/b...a/2843ed85.jpg

07-18-2012, 12:51 AM	#6
jamal1984 The Beautification of Car View User's Garage Drives: Toyota Yaris S Join Date: Aug 2006 Location: Georgia, USA Posts: 967	weave all the same from front bumber, doors, and back bumber. Front Fenders and Hood are difference. I did this as a purpose to show it to my customers. __________________ The Beautification Of Car Enthusiast

07-18-2012, 10:20 AM	#7
why? Only Happy When it Rains View User's Garage Drives: Yaris LB Join Date: Jan 2006 Location: harnett county NC Posts: 4,097	symmetry is boring. i like it the way it is, good job. people are so picky sometimes. __________________ Colin Chapman disciple

07-18-2012, 11:04 AM	#8
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	that has got to add like, 500 hp :D I like the look, reminds me of someone replacing everything they could get their hands on with carbon fiber then rocking it like that. __________________ mods:15''Drag DR21 w/Nitto NeoGen 205/50R15, Tanabe DF210 lowering springs 1.6/1.8, TRD Rear Sway Bar, Tanabe Front Sway Bar, Micro Image Short Throw Shift Kit (both in and under), 8.64lbs flywheel, F1 Stage 4 Clutch, AEM Cold Air Intake (Red), Megan Racing Header, DC Sports Axle Back Exhaust, Micro Image Crank Pulley, NST lite Alternator Pulley, ARP Manifold Stud Kit,Tanabe Front Strut Tower Brace, ScanGuage II, Micro Image Silicone Radiator Hose Kit (Red), NRG Carbon Fiber Shift Knob (round), 2009-2011 Toyota Yaris Liftback Foglight kit, NRG Grounding Kit (Red), Hella Horns(Red),CF Hood

07-18-2012, 11:52 AM	#9
jamal1984 The Beautification of Car View User's Garage Drives: Toyota Yaris S Join Date: Aug 2006 Location: Georgia, USA Posts: 967	thanks __________________ The Beautification Of Car Enthusiast

07-18-2012, 12:39 AM	#4
Betrivent Not quite a noob Drives: e46 325 Join Date: Jul 2009 Location: edmonton Posts: 1,408	The weave doesn't seem to be all the same direction..

07-18-2012, 12:13 PM	#11
TickleTimeTim Free Mustache Rides View User's Garage Drives: 2007 Yaris HB Join Date: Jan 2009 Location: Arkansas Posts: 1,247	so what was the biggest single piece of wrap you needed? was it for the roof? i like it __________________ Club SHIFT

07-18-2012, 12:38 PM	#12
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,868	I bet it was the front bumper __________________ -Derrick- "Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting."

07-18-2012, 03:05 PM	#15
TickleTimeTim Free Mustache Rides View User's Garage Drives: 2007 Yaris HB Join Date: Jan 2009 Location: Arkansas Posts: 1,247	total price of wrap? where did you get it? __________________ Club SHIFT

07-18-2012, 05:19 PM	#17
jamal1984 The Beautification of Car View User's Garage Drives: Toyota Yaris S Join Date: Aug 2006 Location: Georgia, USA Posts: 967	3M Dinoc or 3Mij380cv3 for front bumper and back bumper due to it's high stretch capable, you can use cheaper material for doors and fenders. Prices? anywhere from $400 - $800 dollars depend on the material. Or You can get away with the one i'm using for about $300 dollars but it's get thinner when you over stretch it, i scratches a few places here and there when i'm put the headlights back on...... __________________ The Beautification Of Car Enthusiast

07-18-2012, 05:47 PM	#18
david_827 View User's Garage Drives: 07 Yaris Sedan Join Date: May 2012 Location: boston, MA Posts: 268	wow, that looks nice, btw out of curiosity, what %tint do u have?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber Wrap Side Mirror - Video coming	jamal1984	Cosmetic Modifications (Exterior/Interior)	19	06-27-2013 12:05 AM
Carbon Fiber Wrap..Almost Finish...Pics	jamal1984	Cosmetic Modifications (Exterior/Interior)	16	07-13-2012 06:13 AM
Carbon Fiber Wrap Hood - Video Coming Soon	jamal1984	Cosmetic Modifications (Exterior/Interior)	11	05-14-2012 11:40 AM
NEFFY carbon fiber wrap material	cali yaris	Micro Image	29	02-24-2010 09:34 PM
Carbon offsetting with TerraPass	BailOut	General Yaris / Vitz Discussion	14	05-28-2007 01:29 AM