cheap trick... - Toyota Yaris Forums

tooter · 09-06-2012, 10:30 PM

I wanted some cheap bumper protection from the exhaust...

...so I cut out a piece of no-slip safety stair tread and stuck it onto the bumper with clear silicone.

Cost: $6.

Kaotic Lazagna · 09-06-2012, 11:05 PM

That's cool, but I don't think you have to worry about your bumper. I've been running mine like this for a LONG time

g.q.vios · 09-07-2012, 12:02 AM

Hey, kaotic I've been wanting to do a center exhaust like the one u have for a while... Just looking for an axle back...A while back i Was going to do a dual exhaust with a full body kit...I had the body kit got it from garm then decided to opt out after I was informed that a tru dual exhaust system is not ment for the yaris so i was disapointed and i gave up on the project... so looking to do a axle back is yours a full back or just axle back??? i see the dual tip but thats all it is right thanks... Just trying to get some things going again for the yaris also how much did you spend thanks in advance for the info...

g.q.vios · 09-07-2012, 12:03 AM

@ tooter... Nicely done...

TOLMACH · 12-12-2012, 08:54 PM

Quote:

Originally Posted by g.q.vios

@ tooter... Nicely done...

+1

bobolinko · 09-07-2012, 07:12 PM

Quote:

Originally Posted by g.q.vios

Hey, kaotic I've been wanting to do a center exhaust like the one u have for a while... Just looking for an axle back...A while back i Was going to do a dual exhaust with a full body kit...I had the body kit got it from garm then decided to opt out after I was informed that a tru dual exhaust system is not ment for the yaris so i was disapointed and i gave up on the project... so looking to do a axle back is yours a full back or just axle back??? i see the dual tip but thats all it is right thanks... Just trying to get some things going again for the yaris also how much did you spend thanks in advance for the info...

You know, I had been told the same thing, but I don't brlieve everything I hear so I did my dual exhaust system anyway. I even have a valve in the exhaust since one side is quiet while the other is loud, I can switch to either, or both... Mine is an XD, but not much different than a Yaris!

Below is a picture of the Butterfly valve assy.

tooter · 09-07-2012, 02:08 PM

Quote:

Originally Posted by Kaotic Lazagna

That's cool, but I don't think you have to worry about your bumper. I've been running mine like this for a LONG time

Yeah, I was just getting paranoid about the white paint getting smudged.

Kaotic Lazagna · 09-07-2012, 12:04 AM

Mine is a resonator back. I was going to go with a cat back, but the muffler shop rep said that it might sound raspy/ricey and suggested that I keep the resonator. PM me if you have any other questions

TickleTimeTim · 09-08-2012, 09:31 AM

^^sexy.
And good job on the bumper protector.

CrankyOldMan · 09-08-2012, 02:53 PM

Could you share some details on the exhaust butterfly valve?

bobolinko · 09-08-2012, 06:46 PM

Quote:

Originally Posted by CrankyOldMan

Could you share some details on the exhaust butterfly valve?

Here's a link to where I purchased it from:

http://www.jegs.com/i/Race-Ready/815...rentProductId=

Tomatogrower · 12-12-2012, 01:52 PM

Very nice! Liking the trick!

09-06-2012, 10:30 PM	#1
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	cheap trick... I wanted some cheap bumper protection from the exhaust... ...so I cut out a piece of no-slip safety stair tread and stuck it onto the bumper with clear silicone. Cost: $6.

09-08-2012, 09:31 AM	#9
TickleTimeTim Free Mustache Rides View User's Garage Drives: 2007 Yaris HB Join Date: Jan 2009 Location: Arkansas Posts: 1,247	^^sexy. And good job on the bumper protector. __________________ Club SHIFT

12-12-2012, 01:52 PM	#12
Tomatogrower The Flying Tomato View User's Garage Drives: 2009 Red Yaris Hatchback Join Date: Dec 2009 Location: Charleston, South Carolina Posts: 49	Very nice! Liking the trick! __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-06-2012, 11:05 PM	#2
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	That's cool, but I don't think you have to worry about your bumper. I've been running mine like this for a LONG time

09-07-2012, 12:02 AM	#3
g.q.vios jqueza@microimage Drives: 2010 vios Join Date: Apr 2012 Location: Orange County Posts: 198	Hey, kaotic I've been wanting to do a center exhaust like the one u have for a while... Just looking for an axle back...A while back i Was going to do a dual exhaust with a full body kit...I had the body kit got it from garm then decided to opt out after I was informed that a tru dual exhaust system is not ment for the yaris so i was disapointed and i gave up on the project... so looking to do a axle back is yours a full back or just axle back??? i see the dual tip but thats all it is right thanks... Just trying to get some things going again for the yaris also how much did you spend thanks in advance for the info...

09-07-2012, 12:03 AM	#4
g.q.vios jqueza@microimage Drives: 2010 vios Join Date: Apr 2012 Location: Orange County Posts: 198	@ tooter... Nicely done...

09-07-2012, 12:04 AM	#8
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	Mine is a resonator back. I was going to go with a cat back, but the muffler shop rep said that it might sound raspy/ricey and suggested that I keep the resonator. PM me if you have any other questions

09-08-2012, 02:53 PM	#10
CrankyOldMan 2ZR swap. DO IT! Ask how! View User's Garage Drives: 09 Meteoric Metallic HB Join Date: Feb 2011 Location: West Michigan Posts: 2,333	Could you share some details on the exhaust butterfly valve?