found some wheels... - Toyota Yaris Forums

joey1320 · 06-10-2007, 07:11 PM

i have been looking for 15" wheels for awhile and i really can't see myself paying over $500 buck for 15" packages, so i bought my brothers '03 Civic SI wheels.

i paid $125 plus a 10" sub/amp that i had sitting for awhile(not gonna used).
this is what they look like. they have 195/55/15 tires and i'm probably gonna go with 205/50/15 because i like when the tire sticks out a bit from the wheel.

anyways i'm picking them up tomorrow, so i'll try to post pics asap.

Sabretooth · 06-11-2007, 04:51 AM

All I say is just remember to pry off the Honda symbol to save yourself the grief... buy some Toyota symbols and do the swap,

Nothing worse than seeing a nice MR2 sitting on Civic rims.

*kimona* · 06-11-2007, 08:48 AM

Hey Joey,

Since seeing your car with those Mini wheels, I looked into getting hubcentric rings. Anyway, hubcentric rings can be custom made for OEM wheels to permit other applications.

Probably best not to rely on a lugcentric application, you can get custom hubcentric rings made here:

customerservice@eurosportgarage.com

Just a suggestion. Have fun with your Yaris!

joey1320 · 06-11-2007, 09:20 AM

Quote:

Originally Posted by kimona54

Hey Joey,

Since seeing your car with those Mini wheels, I looked into getting hubcentric rings. Anyway, hubcentric rings can be custom made for OEM wheels to permit other applications.

Probably best not to rely on a lugcentric application, you can get custom hubcentric rings made here:

customerservice@eurosportgarage.com

Just a suggestion. Have fun with your Yaris!

well thank you. i was looking online yesterday for a compnay that would make some rings and wasn't able to find any.
thanks!

hey did you get the mini wheels?

kurokoma-kun · 06-11-2007, 11:17 AM

Is the Totyota 4x100 hub size still 54.1 mm? It's small, but hubcentric rings with this ID should be available somewhere...

*kimona* · 06-11-2007, 11:59 AM

Quote:

Originally Posted by joey1320

well thank you. i was looking online yesterday for a compnay that would make some rings and wasn't able to find any.
thanks!

hey did you get the mini wheels?

Yah, I did the same, and I finally came up with these guys at eurosport garage. BTW, they quoted me $50 shipped. Well, not cheap, but they will be a custom job and you won't have to eworry about vibration at speed.

And, no, I didn't get the Mini wheels. This guy near me has them sitting in his garage and he only wants $100. And while I do like the look, I'm actually leaning in another direction for wheels... 15's or 16's.

*kimona* · 06-11-2007, 12:02 PM

Quote:

Originally Posted by kurokoma-kun

Is the Totyota 4x100 hub size still 54.1 mm? It's small, but hubcentric rings with this ID should be available somewhere...

While hubcentric rings are widely available to fit aftermarket wheels with those huge center holes, OEM to OEM rings have to be custom made.

kurokoma-kun · 06-11-2007, 12:51 PM

Quote:

Originally Posted by kimona54

While hubcentric rings are widely available to fit aftermarket wheels with those huge center holes, OEM to OEM rings have to be custom made.

cwap

06-10-2007, 07:11 PM	#1
joey1320 View User's Garage Drives: Yaris LB Join Date: Mar 2007 Location: Lakewood, Ohio Posts: 538	found some wheels... i have been looking for 15" wheels for awhile and i really can't see myself paying over $500 buck for 15" packages, so i bought my brothers '03 Civic SI wheels. i paid $125 plus a 10" sub/amp that i had sitting for awhile(not gonna used). this is what they look like. they have 195/55/15 tires and i'm probably gonna go with 205/50/15 because i like when the tire sticks out a bit from the wheel. anyways i'm picking them up tomorrow, so i'll try to post pics asap.

06-11-2007, 04:51 AM	#2
Sabretooth 37HSSV View User's Garage Drives: '11 Mazdaspeed 3 Join Date: Jan 2007 Location: St Cloud FL Posts: 1,395	All I say is just remember to pry off the Honda symbol to save yourself the grief... buy some Toyota symbols and do the swap, Nothing worse than seeing a nice MR2 sitting on Civic rims. __________________ 07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance.

06-11-2007, 11:17 AM	#5
kurokoma-kun Drives: 2007 Yaris HB Join Date: Apr 2007 Location: my own little world Posts: 1,256	Is the Totyota 4x100 hub size still 54.1 mm? It's small, but hubcentric rings with this ID should be available somewhere... __________________ my yaris, kurokoma-kun

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
When will the Yaris hit the showrooms at dealers?	Petrolhead	New YARIS Purchase Forum	181	11-28-2011 08:03 AM
Feedback on these wheels	BulletProofAuto	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	21	06-04-2007 09:09 PM
Buddy Club Wheels	BulletProofAuto	Sponsors Classifieds Area	8	10-19-2006 07:55 PM
Do bigger wheels and tires improve performance	Driver	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	14	10-14-2006 07:01 PM
Enkei RZ5 wheels on Liftback	kennywhy	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	3	09-23-2006 05:22 AM

06-11-2007, 08:48 AM	#3
kimona Super Moderator Drives: 2014 White VITZ Join Date: May 2007 Location: Huntington Bch, CA Posts: 4,938	Hey Joey, Since seeing your car with those Mini wheels, I looked into getting hubcentric rings. Anyway, hubcentric rings can be custom made for OEM wheels to permit other applications. Probably best not to rely on a lugcentric application, you can get custom hubcentric rings made here: customerservice@eurosportgarage.com Just a suggestion. Have fun with your Yaris!