Power Enterprise Supercharger JUST RELEASED! - Page 2 - Toyota Yaris Forums

mikenacarato · 01-20-2009, 11:09 PM

did they have the yaris specific kit or did they modify the xb kit?

saplaymate · 01-20-2009, 11:27 PM

Does this mean you are going to Warranty my Rotrex unit as well! Since I bought it from you!

Gideon · 01-20-2009, 11:31 PM

Quote:

Originally Posted by saplaymate

Does this mean you are going to Warranty my Rotrex unit as well! Since I bought it from you!

What went bad with your kit?

Power Enterprise Evan · 01-22-2009, 04:28 PM

Quote:

Originally Posted by saplaymate

Does this mean you are going to Warranty my Rotrex unit as well! Since I bought it from you!

We do not warranty any products unless they are purchased directly from PE USA or one of our direct dealers. at the time you circumvented the restriction that was in place by rotrex, buying it from japan voids any warranty or support from PE USA

we will offer support to any products purchased from us

saplaymate · 01-23-2009, 12:42 AM

Quote:

Originally Posted by Power Enterprise Evan

We do not warranty any products unless they are purchased directly from PE USA or one of our direct dealers. at the time you circumvented the restriction that was in place by rotrex, buying it from japan voids any warranty or support from PE USA

we will offer support to any products purchased from us

Hmmm, was that the story.

Anyone with questions feel free to PM me.

RHDVIPbB · 01-23-2009, 11:31 AM

Had one of their kits on my old xB about 3 years ago. There was also a girl from Ohio with one. Was a nice kit. I didn't like that I had to modify the plastic valve cover to make it fit though. As far as FMIC, I never got that far. I sold it before I finished the piping work. Was a failry simple plan and had plenty of room in the box.

Will have to think about getting one for the Yaris. I take it that the kit will fit the sedan without any problems? If so, give me some time to put some money aside.

Also, did they change any of the oil cooling system?

PETERPOOP · 01-20-2009, 11:43 PM

i still want videos. what kinda boost does this put down? what were the specs of the car on that dyno? exhaust? pulleys? intake? would this work with richard's manifold? would a bigger Throttle Body or richard's manifold make this kit throw cells? i guess it'd need to be retuned with a different manifold and throttle body, correct? since it's based only on the stock manifold and throttle body

Gideon · 01-20-2009, 11:48 PM

Quote:

Originally Posted by PETERPOOP

i still want videos. what kinda boost does this put down? what were the specs of the car on that dyno? exhaust? pulleys? intake? would this work with richard's manifold? would a bigger Throttle Body or richard's manifold make this kit throw cells? i guess it'd need to be retuned with a different manifold and throttle body, correct? since it's based only on the stock manifold and throttle body

Boost pressure is mentioned on the previous page with the additional information about the kit.

The piggyback is reprogrammable, so if you ended up with a new intake manifold and TB you would need to have the it retuned for that.

staypuft · 01-21-2009, 12:57 AM

wow i originally wanted this kit long time ago, i guess its too late now

ddongbap · 01-21-2009, 02:19 AM

Lol. Now its offical?

cm07yaris · 01-21-2009, 12:59 PM

Group buy?

TheRealEnth · 01-21-2009, 01:11 PM

gb

Nexus1155 · 01-21-2009, 01:47 PM

But seriosuly is there a financing option I know some companies offer it now?, dumping 4k all at once isn't as ideal as it seems, I wouldn't mind $500 a month. Or would id be better to grab a credit card?

Thej3sta2 · 01-21-2009, 02:19 PM

chirp chirp

PETERPOOP · 01-21-2009, 03:42 PM

They should throw in that intercooler. Bogus.

CASTREX · 01-21-2009, 04:42 PM

You can pick a small IC for like $50

Piping looks simple enough for a DIY

If the kit perfoms as advertize and all the bugs have been cured... then this is a really good option for some one looking for trouble free boost.

Power Enterprise Evan · 01-22-2009, 04:36 PM

Quote:

Originally Posted by CASTREX

You can pick a small IC for like $50

Piping looks simple enough for a DIY

If the kit perfoms as advertize and all the bugs have been cured... then this is a really good option for some one looking for trouble free boost.

yes, the piping is very easy to manipulate, if you guys really dont want to spend the extra bending pipe, you can just get pipe, sand and a torch..

fill the pipe with sand, heat it up, bend it, cool it off and paint it black...

the sand helps keep the pipe from kinking when you bend it

PETERPOOP · 01-21-2009, 05:10 PM

50$? show me where. Don't forget my lovely shipping rate to hawaii. DIY piping? Wouldn't mandrel bending be needed for the piping?

01-20-2009, 11:27 PM	#2
saplaymate Drives: 08' HB Join Date: Oct 2008 Location: SATX Posts: 117	Does this mean you are going to Warranty my Rotrex unit as well! Since I bought it from you! __________________ 0 - 60 in 3 shifts

01-23-2009, 11:31 AM	#6
RHDVIPbB Right beside you, wave Drives: 08 PBM Yaris Sedan Join Date: Oct 2008 Location: Louisville, KY Posts: 742	Had one of their kits on my old xB about 3 years ago. There was also a girl from Ohio with one. Was a nice kit. I didn't like that I had to modify the plastic valve cover to make it fit though. As far as FMIC, I never got that far. I sold it before I finished the piping work. Was a failry simple plan and had plenty of room in the box. Will have to think about getting one for the Yaris. I take it that the kit will fit the sedan without any problems? If so, give me some time to put some money aside. Also, did they change any of the oil cooling system? __________________ 2008 Toyota Yaris Sedan. Pacific Blue Mica. Custom vinyl eyebrows, color matched interior trim pieces, Vios lip spoiler, 17" Maas rims 2010 Scion xB 7.0 Release Series. 1535 of 2000. Murasaki. Stock with TRD springs.

01-21-2009, 12:57 AM	#9
staypuft aka SDMF View User's Garage Drives: 07 LB Met Met Join Date: Oct 2008 Location: chicago Posts: 298	wow i originally wanted this kit long time ago, i guess its too late now __________________ follow me on twitter www.twitter.com/samuryan_x

01-21-2009, 01:11 PM	#12
TheRealEnth Beast View User's Garage Drives: 2007 Blz Blu LB Join Date: Oct 2008 Location: Miami, FL Posts: 1,365	gb __________________ One you've taken a yaris for a spin, there's no turning back. Its a Chao!!!

01-21-2009, 02:19 PM	#14
Thej3sta2 Drives: Soon to be LFA Join Date: Oct 2008 Location: Orlando, FL Posts: 523	chirp chirp __________________

01-20-2009, 11:09 PM	#1
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	did they have the yaris specific kit or did they modify the xb kit?

01-20-2009, 11:43 PM	#7
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	i still want videos. what kinda boost does this put down? what were the specs of the car on that dyno? exhaust? pulleys? intake? would this work with richard's manifold? would a bigger Throttle Body or richard's manifold make this kit throw cells? i guess it'd need to be retuned with a different manifold and throttle body, correct? since it's based only on the stock manifold and throttle body

01-21-2009, 02:19 AM	#10
ddongbap Banned Drives: yw calls me douche and racist. Join Date: Aug 2007 Location: hay Posts: 2,183	Lol. Now its offical?

01-21-2009, 12:59 PM	#11
cm07yaris View User's Garage Drives: 2007 Toyota Yaris Blazing Blue Join Date: May 2007 Location: Appleton, WI Posts: 647	Group buy?

01-21-2009, 01:47 PM	#13
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	But seriosuly is there a financing option I know some companies offer it now?, dumping 4k all at once isn't as ideal as it seems, I wouldn't mind $500 a month. Or would id be better to grab a credit card?

01-21-2009, 03:42 PM	#15
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	They should throw in that intercooler. Bogus.

01-21-2009, 04:42 PM	#16
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	You can pick a small IC for like $50 Piping looks simple enough for a DIY If the kit perfoms as advertize and all the bugs have been cured... then this is a really good option for some one looking for trouble free boost.

01-21-2009, 05:10 PM	#18
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	50$? show me where. Don't forget my lovely shipping rate to hawaii. DIY piping? Wouldn't mandrel bending be needed for the piping?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
When will the Yaris hit the showrooms at dealers?	Petrolhead	New YARIS Purchase Forum	181	11-28-2011 08:03 AM
Questions and advice required about power upgrading(windows & locks)	W.A.S.P	DIY / Maintenance / Service	10	07-22-2009 03:59 AM
Pre-Hack Repost: DIY Eaton Supercharger, Why Not?	Nexus1155	Forced Induction Forum	67	01-10-2009 02:23 PM
Well seems the F&*king Power Package with Manual is impossible in the States(Hatch)	gaffo	General Yaris / Vitz Discussion	28	07-15-2007 08:55 PM
Need Help - Electrical (finding Power)	Ayka	DIY / Maintenance / Service	7	10-12-2006 12:51 PM