Just ordered my Scangauge II - Page 2 - Toyota Yaris Forums

hyprmiler · 12-25-2009, 10:54 AM

Yea I did that, just >_<

Merry Christmas btw.

Twistoffate0817 · 01-29-2010, 06:35 PM

Is this or the eco meter better for instant MPG readings?

talnlnky · 01-29-2010, 09:59 PM

Quote:

Originally Posted by Twistoffate0817

Is this or the eco meter better for instant MPG readings?

i believe the ecometer refreshes twice per second, and the SGII you can set to refresh once every two seconds, once a second, or twice a second.

Kongo-Otto · 01-30-2010, 04:19 AM

I received my Scangauge II yesterday. Does anybody know if the Horsepower XGauge is supposed to work on the Yaris? I know it cant be very accurate but i just want to know this.

Hard_Yaris · 01-30-2010, 11:55 AM

I got my Horsepower working on the Scangauge II... not sure its accurate reading 11hp some of the time...

then 0hp while in gear and not pressing on the gas. Very Cool for Gas Savings. Take advantage of DFCO (Deceleration Fuel Cutoff).

Master Shake · 02-01-2010, 06:58 PM

I have a scangauge and love it.

Kongo-Otto · 02-03-2010, 12:37 PM

Quote:

Originally Posted by Hard_Yaris

I got my Horsepower working on the Scangauge II... not sure its accurate reading 11hp some of the time...

then 0hp while in gear and not pressing on the gas. Very Cool for Gas Savings. Take advantage of DFCO (Deceleration Fuel Cutoff).

I gave it a try and its working now. I dont know how exact the calculation is but it is a funny gadget for sure.

talnlnky · 02-04-2010, 06:06 PM

Quote:

Originally Posted by Kongo-Otto

I gave it a try and its working now. I dont know how exact the calculation is but it is a funny gadget for sure.

yeah... i programmed the HP function in last fall.... fun toy for about 15 minutes. I don';t think i've ever seen it go over 80. most of the time it doesn't go above 40. When I idle its in the single digits (2-5hp).

The most helpful guages i've found so far are MPG/MPH/TPS/FWT/RPM.... sometimes i'll look at voltage, air intake, or LOD.

Kongo-Otto · 02-05-2010, 02:14 PM

I found out that my Scangauge shows me a zero under full throttle. Looks like it thinks the fuel cut is working. Any solution to this? The TPS value is default = 24.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Scangauge II Thread - Share your Data, Discuss Settings ,Problems, Findings!	TRD_Yaris	General Yaris / Vitz Discussion	183	02-01-2017 12:18 PM
BDD's first mods - tach + Scangauge II	BDD	Performance Modifications	11	04-29-2013 11:23 AM
What is the average Scangauge II offset percentage ?	127.0.0.1	Fuel Economy Forum	13	03-05-2010 08:08 PM
scangauge II versions	TinyGiant	Fuel Economy Forum	1	12-23-2008 12:10 PM
Ordered mine today... now the wait begins	boris13	New YARIS Purchase Forum	1	11-10-2006 07:40 PM

12-25-2009, 10:54 AM	#19
hyprmiler It's cold in Wisconsin... Drives: 2008 and 2009 Yaris Sedans Join Date: Nov 2009 Location: Wisconsin Posts: 81	Yea I did that, just >_< Merry Christmas btw.

01-29-2010, 06:35 PM	#20
Twistoffate0817 My Little Blue Egg :) Drives: '09 3 door Yaris Join Date: Dec 2008 Location: Voorhees, NJ Posts: 185	Is this or the eco meter better for instant MPG readings?

01-30-2010, 04:19 AM	#22
Kongo-Otto Drives: '09 Yaris & '10 Auris Join Date: Apr 2009 Location: Germany Posts: 268	I received my Scangauge II yesterday. Does anybody know if the Horsepower XGauge is supposed to work on the Yaris? I know it cant be very accurate but i just want to know this.

01-30-2010, 11:55 AM	#23
Hard_Yaris Drives: 07 Yaris Join Date: Dec 2009 Location: Edmonton Alberta Posts: 109	I got my Horsepower working on the Scangauge II... not sure its accurate reading 11hp some of the time... then 0hp while in gear and not pressing on the gas. Very Cool for Gas Savings. Take advantage of DFCO (Deceleration Fuel Cutoff).

02-01-2010, 06:58 PM	#24
Master Shake Drives: 2010 Red Yaris manual Join Date: Jan 2010 Location: VA Posts: 6	I have a scangauge and love it.

02-05-2010, 02:14 PM	#27
Kongo-Otto Drives: '09 Yaris & '10 Auris Join Date: Apr 2009 Location: Germany Posts: 268	I found out that my Scangauge shows me a zero under full throttle. Looks like it thinks the fuel cut is working. Any solution to this? The TPS value is default = 24.