kuro-kuro, mga sarisaring katanungan - Page 49 - Toyota Yaris Forums

rye7jen · 03-06-2011, 04:04 AM

@syntax, as soon as alam ko na yung wiring pati na rin yung pagkabit ng relay, ikakabit ko na agad.

rickyml · 03-06-2011, 04:06 AM

naku, naitapon ko na yung diagram eh. pero magbe-base ako sa picture na pinadala mo. yung dalawang may butas... pagiisahin mo lang yon. then, yung isa sa neg & possitive, ida-direct mo rin sya connected doon sa ground (doon sa may butas na pinagisa mo) then yung isang connector pagisahin mo rin yon at iyon ang ikakabit mo sa wire na avail sa yaris natin.

rickyml · 03-06-2011, 04:10 AM

tamaaa! hindi na kailangan ng relay yan. magddrawing na lang ako ng diagram rye... tapos scan ko at ipadala ko sayo. ok?

rye7jen · 03-06-2011, 04:13 AM

@Joni, baka nga, kasi nung tinesting ni kabayan di naman niya ginamitan ng relay, takot lang ako kasi 30A yung horn, baka bumigay nanaman yung stock fuse.

@ricky, cge pre maraming salamat, antayin ko na lang.

jonimac · 03-06-2011, 04:30 AM

Quote:

Originally Posted by rye7jen

@Joni, baka nga, kasi nung tinesting ni kabayan di naman niya ginamitan ng relay, takot lang ako kasi 30A yung horn, baka bumigay nanaman yung stock fuse.

@ricky, cge pre maraming salamat, antayin ko na lang.

@rye, hindi bibigay yun bro.

Ano kabit ko na?

rye7jen · 03-06-2011, 04:34 AM

Quote:

Originally Posted by jonimac

@rye, hindi bibigay yun bro.

Ano kabit ko na?

Hahaha!!! Cge cge!

jonimac · 03-06-2011, 04:40 AM

Quote:

Originally Posted by rye7jen

Hahaha!!! Cge cge!

rye, kumpleto ba ng connectors yan? Kung meron, wire na lang kulang? Set mo lang kung kelan, darating ako bro.

syntax · 03-06-2011, 04:34 AM

Quote:

Originally Posted by jonimac

@rye, hindi bibigay yun bro.

Ano kabit ko na?

kelan natin ikakabit pre? sama ako... gusto ko rin makita kung papano

syntax · 03-06-2011, 04:20 AM

@ rye upload ka ng audio clip na before and after installation, or habang install mo picture picture wehehehehe

rye7jen · 03-06-2011, 04:32 AM

Quote:

Originally Posted by syntax

@ rye upload ka ng audio clip na before and after installation, or habang install mo picture picture wehehehehe

Cge, pre kuhanan ko before and after.

rickyml · 03-06-2011, 04:26 AM

paano ba maginsert ng image dito?

rickyml · 03-06-2011, 04:29 AM

sana maintindihan nyo po...

rye7jen · 03-06-2011, 04:33 AM

Quote:

Originally Posted by rickyml

sana maintindihan nyo po...

Ricky thanks, gets ko na rin haha!!

syntax · 03-06-2011, 04:45 AM

@ jonimac indi ba tatanggalin lang ung dating horn tapos ikakabit yan? same wires pa rin ang gagamitin.

jonimac · 03-06-2011, 05:12 AM

Quote:

Originally Posted by syntax

@ jonimac indi ba tatanggalin lang ung dating horn tapos ikakabit yan? same wires pa rin ang gagamitin.

yung stock horn natin isa lang kasi so may kable na yun. Since dalawa kasi ito, need to parallel(connection) these 2 horns (improvise cable) saka natin ikakabit dun sa inalisan ng stock. @rye, tama male plug kailngan natin dito, bili karin nun.

rye7jen · 03-06-2011, 04:57 AM

@Joni, nakabili na ako ng connectors tapos may wire na rin, yung nagbebenta na rin sa electric shop ang nag-recommend nung wire, ang kailangan na lang yata eh yung male connector para sa original harness.

@pao, mag-improvise lang ng wire connection para sa dalawang horns, tapos isang male connection para stock connection. (tama ba?)

syntax · 03-06-2011, 05:27 AM

ahhhhh ok... nu nga ulit? wehehehehehe wala ba drawing at pop ups para magets ko wehehehe,, anyway sama ako dyan ha para ma gets ko kung pano ikakabit..

rye7jen · 03-06-2011, 05:37 AM

Name: Horn diagram2.JPG
Views: 64
Size: 59.6 KB

Yung black sa dulo ng red wire, yun yung kailangan ko pang bilhin.

03-06-2011, 04:06 AM	#2
rickyml View User's Garage Drives: Yaris 2008 Join Date: Aug 2010 Location: Jubail, Saudi Arabia Posts: 816	naku, naitapon ko na yung diagram eh. pero magbe-base ako sa picture na pinadala mo. yung dalawang may butas... pagiisahin mo lang yon. then, yung isa sa neg & possitive, ida-direct mo rin sya connected doon sa ground (doon sa may butas na pinagisa mo) then yung isang connector pagisahin mo rin yon at iyon ang ikakabit mo sa wire na avail sa yaris natin. __________________ Yaris X: The Largest Most Organized Pinoy Yaris Owners Group In The Middle East (Eastern Region Chapter)

03-06-2011, 04:10 AM	#3
rickyml View User's Garage Drives: Yaris 2008 Join Date: Aug 2010 Location: Jubail, Saudi Arabia Posts: 816	tamaaa! hindi na kailangan ng relay yan. magddrawing na lang ako ng diagram rye... tapos scan ko at ipadala ko sayo. ok? __________________ Yaris X: The Largest Most Organized Pinoy Yaris Owners Group In The Middle East (Eastern Region Chapter)

03-06-2011, 04:26 AM	#11
rickyml View User's Garage Drives: Yaris 2008 Join Date: Aug 2010 Location: Jubail, Saudi Arabia Posts: 816	paano ba maginsert ng image dito? __________________ Yaris X: The Largest Most Organized Pinoy Yaris Owners Group In The Middle East (Eastern Region Chapter)

03-06-2011, 04:29 AM	#12
rickyml View User's Garage Drives: Yaris 2008 Join Date: Aug 2010 Location: Jubail, Saudi Arabia Posts: 816	sana maintindihan nyo po... Attached Images __________________ Yaris X: The Largest Most Organized Pinoy Yaris Owners Group In The Middle East (Eastern Region Chapter)

03-06-2011, 05:37 AM	#18
rye7jen View User's Garage Drives: 2nz-fe '10 Join Date: Jan 2010 Location: Saudi Arabia Posts: 1,360	Ewan ko kung ganito yung gustong tukuyin ni Ricky kanina. Yung black sa dulo ng red wire, yun yung kailangan ko pang bilhin.

03-06-2011, 04:04 AM	#1
rye7jen View User's Garage Drives: 2nz-fe '10 Join Date: Jan 2010 Location: Saudi Arabia Posts: 1,360	@syntax, as soon as alam ko na yung wiring pati na rin yung pagkabit ng relay, ikakabit ko na agad.

03-06-2011, 04:13 AM	#4
rye7jen View User's Garage Drives: 2nz-fe '10 Join Date: Jan 2010 Location: Saudi Arabia Posts: 1,360	@Joni, baka nga, kasi nung tinesting ni kabayan di naman niya ginamitan ng relay, takot lang ako kasi 30A yung horn, baka bumigay nanaman yung stock fuse. @ricky, cge pre maraming salamat, antayin ko na lang.

03-06-2011, 04:20 AM	#9
syntax Drives: Yaris Sedan 2010 "shadow" Join Date: Mar 2010 Location: Riyadh,KSA Posts: 4,514	@ rye upload ka ng audio clip na before and after installation, or habang install mo picture picture wehehehehe

03-06-2011, 04:45 AM	#14
syntax Drives: Yaris Sedan 2010 "shadow" Join Date: Mar 2010 Location: Riyadh,KSA Posts: 4,514	@ jonimac indi ba tatanggalin lang ung dating horn tapos ikakabit yan? same wires pa rin ang gagamitin.

03-06-2011, 04:57 AM	#16
rye7jen View User's Garage Drives: 2nz-fe '10 Join Date: Jan 2010 Location: Saudi Arabia Posts: 1,360	@Joni, nakabili na ako ng connectors tapos may wire na rin, yung nagbebenta na rin sa electric shop ang nag-recommend nung wire, ang kailangan na lang yata eh yung male connector para sa original harness. @pao, mag-improvise lang ng wire connection para sa dalawang horns, tapos isang male connection para stock connection. (tama ba?)

03-06-2011, 05:27 AM	#17
syntax Drives: Yaris Sedan 2010 "shadow" Join Date: Mar 2010 Location: Riyadh,KSA Posts: 4,514	ahhhhh ok... nu nga ulit? wehehehehehe wala ba drawing at pop ups para magets ko wehehehe,, anyway sama ako dyan ha para ma gets ko kung pano ikakabit..