side marker lights - Page 5 - Toyota Yaris Forums

evilreign · 03-01-2007, 11:34 PM

Damn those side markers look good. Nice and bright too, I likes..

gravylegs · 03-02-2007, 10:01 AM

Thanks Chris! This is now on the list of things to do!

reggaetonfreak · 07-22-2007, 02:52 PM

thank you so much for this, i have a white lb too, lol

Jerkratt · 07-22-2007, 07:49 PM

i have spiderlite... tail light led's i have the 3 arm x2's wedge brake ones that fit the stock socket and im using the 5 arm x2 with my aftermarket tails diff socket. been trying to get rid of my 3 arms... cant use them anymore

Wirenut07 · 01-17-2009, 01:41 AM

Has anyone installed them on a sadan?

cali yaris · 01-17-2009, 02:10 AM

alright, another bump for the updated thread, since I sell these since those old days (smoked or clear):

Rotorheader · 01-21-2009, 02:06 PM

PM Sent

MadMax · 02-06-2009, 05:55 PM

Quote:

Originally Posted by cali yaris

alright, another bump for the updated thread, since I sell these since those old days (smoked or clear):

I got my set in the mail today (thanks Garm!

) and they are 'plug and play' but the other end of the harness has to be plugged in to a certain polarity so if they don't work just unplug 'em and swap the plug around to reverse what you had the first time!

Now, I could still use a little help. These new side markers are a bit loose on my car. The original ones were a tad loose; but these are much looser, almost to the point where you can pull them off the car quite easily. So, I was wondering if 1) anyone else had this problem, and 2) if they did, what did they go to fix it?

Cheers! M2

RagnaCaT · 01-17-2009, 10:37 AM

Garm are these plug and play???

bikegerm · 01-17-2009, 02:32 PM

I installed these and love 'em. Here's a few pics. The connector on the right is the connector on your smoked leds'. It needs to plug into the connector on the left which is from the wiring harness inside the fender well. You'll have to slightly modify your connector on the smoked led lights. I used a dremmel tool to cut away the shroud exposing the pins. and they plugged right in to the wiring harness connector. I used some electrical tape to hold them together. Remember there is polarity here.

RagnaCaT · 01-21-2009, 03:13 PM

Quote:

Originally Posted by bikegerm

I installed these and love 'em. Here's a few pics. The connector on the right is the connector on your smoked leds'. It needs to plug into the connector on the left which is from the wiring harness inside the fender well. You'll have to slightly modify your connector on the smoked led lights. I used a dremmel tool to cut away the shroud exposing the pins. and they plugged right in to the wiring harness connector. I used some electrical tape to hold them together. Remember there is polarity here.

Are those the smoked or clear?? They look great!

cali yaris · 01-17-2009, 04:57 PM

I just stripped the two wires, removed both harnesses, and taped it all together -- still working fine after a few months, only took 10 minutes per side.

RagnaCaT · 01-31-2009, 10:47 AM

Quote:

Originally Posted by bikegerm

I installed these and love 'em. Here's a few pics. The connector on the right is the connector on your smoked leds'. It needs to plug into the connector on the left which is from the wiring harness inside the fender well. You'll have to slightly modify your connector on the smoked led lights. I used a dremmel tool to cut away the shroud exposing the pins. and they plugged right in to the wiring harness connector. I used some electrical tape to hold them together. Remember there is polarity here.

Quote:

Originally Posted by cali yaris

I just stripped the two wires, removed both harnesses, and taped it all together -- still working fine after a few months, only took 10 minutes per side.

Question why did you have to modify it??? mine was a simple plug and play??? Thanks anyway GARM!! Super fast shipping!

*kimona* · 01-17-2009, 05:18 PM

I'm still waiting for someone to install some BMW sidemarkers... a popular mod in Japan.

Jerkratt · 01-17-2009, 11:43 PM

Quote:

Originally Posted by kimona

I'm still waiting for someone to install some BMW sidemarkers... a popular mod in Japan.

can u get a part number on those side markers... thers a BMW dealer right around the corner from my pizza delivery job in maywood... MIGHT be able to get a discount on them

cali yaris · 01-17-2009, 05:29 PM

that would be cool. I can also get Silvia side markers, which would rock!

*kimona* · 01-17-2009, 05:45 PM

Yup, the Sylvia side markers would be very cool!

Kioshi · 01-19-2009, 10:21 PM

Jerkratt, you should be the tester for those BMW side markers. It'd be perfect w/ your black setup ^_^. I'm waiting for those too.

07-22-2007, 02:52 PM	#3
reggaetonfreak El Yoe View User's Garage Drives: Yaris Hatchback Join Date: Jul 2007 Location: The D, Delaware Posts: 51	thank you so much for this, i have a white lb too, lol __________________ Cuban to the bone, sitting in a Yaris, ahi si hay!!...

07-22-2007, 07:49 PM	#4
Jerkratt View User's Garage Drives: 08 Yaris Liftback S (RIP 07) Join Date: Apr 2007 Location: Fair Lawn, NJ Posts: 1,379	i have spiderlite... tail light led's i have the 3 arm x2's wedge brake ones that fit the stock socket and im using the 5 arm x2 with my aftermarket tails diff socket. been trying to get rid of my 3 arms... cant use them anymore __________________ "It hurts more when its wet"

01-17-2009, 01:41 AM	#5
Wirenut07 Slave To The Groove Drives: 07 S Join Date: Aug 2007 Location: Turlock Posts: 2	Repeater Lamps Has anyone installed them on a sadan?

01-17-2009, 02:10 AM	#6
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	alright, another bump for the updated thread, since I sell these since those old days (smoked or clear): __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

01-17-2009, 10:37 AM	#9
RagnaCaT HacKers WanTed! View User's Garage Drives: Yaris S HB & Yaris S SD Join Date: Aug 2007 Location: Villalba, Puerto Rico Posts: 435	Garm are these plug and play??? __________________ *R-CaT* Project Yar 2ZR

03-01-2007, 11:34 PM	#1
evilreign Drives: Yaris Join Date: Feb 2007 Location: TX Posts: 24	Damn those side markers look good. Nice and bright too, I likes..

03-02-2007, 10:01 AM	#2
gravylegs Drives: 2007 Yaris Liftback RS Join Date: Apr 2006 Location: Toronto Posts: 35	Thanks Chris! This is now on the list of things to do!

01-21-2009, 02:06 PM	#7
Rotorheader Drives: 07 Yaris Hatchback Join Date: Jul 2007 Location: Lowell, OR Posts: 35	PM Sent

01-17-2009, 04:57 PM	#12
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I just stripped the two wires, removed both harnesses, and taped it all together -- still working fine after a few months, only took 10 minutes per side. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

01-17-2009, 05:29 PM	#16
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	that would be cool. I can also get Silvia side markers, which would rock! __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

01-17-2009, 05:45 PM	#17
kimona Super Moderator Drives: 2014 White VITZ Join Date: May 2007 Location: Huntington Bch, CA Posts: 4,938	Yup, the Sylvia side markers would be very cool!

01-19-2009, 10:21 PM	#18
Kioshi Heart Up! Vitz Drives: トヨタ Vitz Join Date: Jun 2007 Location: Fremont, CA Posts: 2,582	Jerkratt, you should be the tester for those BMW side markers. It'd be perfect w/ your black setup ^_^. I'm waiting for those too.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - HID Retrofit	Violin	DIY / Maintenance / Service	57	06-11-2007 07:17 PM
Smoke your own tail lights	ChinoCharles	Cosmetic Modifications (Exterior/Interior)	9	01-16-2007 12:00 AM
xb side marker swap?	funkstrong	Cosmetic Modifications (Exterior/Interior)	4	10-25-2006 12:32 PM
Fog Lights - only right hand side	JayCee	Cosmetic Modifications (Exterior/Interior)	3	09-26-2006 06:44 PM
Side Turn Signal Lights	bigsky2	Cosmetic Modifications (Exterior/Interior)	15	08-24-2006 07:06 PM