Will a C60 Transmission........ - Toyota Yaris Forums

Ronnie V · 09-29-2018, 05:25 PM

bolt up to a 1NZ-FE in a 2004 Echo?

and is the C60 a similar shift cable setup if it will bolt up?

Thanks for any help.

ArmstrongRacing · 09-29-2018, 06:19 PM

No, there are many modifications that need to happen to get a c60 to fit. There are several posts about it already

Ronnie V · 10-01-2018, 06:30 PM

Thanks, your reply was everything I needed to know.

CrankyOldMan · 10-05-2018, 10:42 AM

You can look at BluevitzRS's C160 swap to see what's involved in the 1st gen Yaris/Echo. It's not a bolt-in mod since it requires notching the frame rail. Armstrong just put a C60 in his 2nd gen Yaris sedan and required the same modification.

That said, it may be possible to use an EC6X style from a recent gen MT Corolla, but nobody has done any research into mounts, brackets, cables, wiring etc. and adapting the throw-out bearing from lever to cylinder style. Don't be discouraged though, there are plenty of people here that would be willing to help point you in the right direction to start the research yourself and you'd get mad props from the community for pioneering the swap.

09-29-2018, 05:25 PM	#1
Ronnie V Drives: 04 3dr HB and 04 5dr RS Join Date: Mar 2018 Location: Brampton Posts: 142	Will a C60 Transmission........ bolt up to a 1NZ-FE in a 2004 Echo? and is the C60 a similar shift cable setup if it will bolt up? Thanks for any help.

09-29-2018, 06:19 PM	#2
ArmstrongRacing Data doesn't lie Drives: That Scrappy 2zrVios Join Date: Oct 2014 Location: San Diego Posts: 761	No, there are many modifications that need to happen to get a c60 to fit. There are several posts about it already __________________ www.Facebook.com/ArmstrongRacingPage www.youtube.com/c/ArmstrongRacing www.instagram.com/Armstrong_Racing http://www.wheelwell.com/profile/55f...35ac4a/garage/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How frequently does the automatic transmission fluid need to be changed?	Hamster	DIY / Maintenance / Service	40	12-15-2018 10:07 PM
Transmission heating up ?	David C	DIY / Maintenance / Service	9	08-04-2016 02:25 PM
Transmission oil?	jamesxl	DIY / Maintenance / Service	3	04-11-2016 11:18 PM
Problem help	MickZEL	DIY / Maintenance / Service	38	08-01-2011 03:52 PM

10-01-2018, 06:30 PM	#3
Ronnie V Drives: 04 3dr HB and 04 5dr RS Join Date: Mar 2018 Location: Brampton Posts: 142	Thanks, your reply was everything I needed to know.

10-05-2018, 10:42 AM	#4
CrankyOldMan 2ZR swap. DO IT! Ask how! View User's Garage Drives: 09 Meteoric Metallic HB Join Date: Feb 2011 Location: West Michigan Posts: 2,333	You can look at BluevitzRS's C160 swap to see what's involved in the 1st gen Yaris/Echo. It's not a bolt-in mod since it requires notching the frame rail. Armstrong just put a C60 in his 2nd gen Yaris sedan and required the same modification. That said, it may be possible to use an EC6X style from a recent gen MT Corolla, but nobody has done any research into mounts, brackets, cables, wiring etc. and adapting the throw-out bearing from lever to cylinder style. Don't be discouraged though, there are plenty of people here that would be willing to help point you in the right direction to start the research yourself and you'd get mad props from the community for pioneering the swap.