|
06-28-2021, 10:08 AM | #1 |
Drives: 2010 Yaris Sedan Join Date: Mar 2018
Location: US
Posts: 21
|
ECM Harness Question
During a recent ECM swap I inadvertently broke the latching mechanism for the Body Side Harness. Is there a way to repair the latching mechanism short of replacing the entire connector (Ain't Gonna Happen!!)?
Thanks! |
06-29-2021, 09:27 AM | #2 |
2ZR swap. DO IT! Ask how!
Drives: 09 Meteoric Metallic HB Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
|
Pictures would help. Some parts can be replaced.
|
07-23-2021, 08:59 PM | #3 |
Drives: 2010 Yaris Sedan Join Date: Mar 2018
Location: US
Posts: 21
|
Hear are a couple of shots of the body side ECM harness where I broke the latching mechanism.
|
07-24-2021, 09:20 AM | #4 |
2ZR swap. DO IT! Ask how!
Drives: 09 Meteoric Metallic HB Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
|
Good news, bad news. Good news is that it's entirely replaceable. The bad news is that it's a pain in the arse to remove the small pins. I just bought a tool from TE (Tyco/AMP) that's supposed to be designed for those and it's not very effective. There's a few other part numbers that I may try but they're really expensive.
|
07-24-2021, 09:34 PM | #5 |
Drives: 2010 Yaris Sedan Join Date: Mar 2018
Location: US
Posts: 21
|
The actual latching slides (maybe not the right term?) are in good shape and seem to hold stuff together pretty well. Maybe I can use a zip tie to assure all stays in place. Not really up to the task of changing the connector. More than likely if it is a PITA I will make the situation worse. Thanks for the info!
|
07-24-2021, 09:53 PM | #6 |
2ZR swap. DO IT! Ask how!
Drives: 09 Meteoric Metallic HB Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
|
Always glad to help! You may find that it's still able to lock in place even with the broken hinge. The slides do most of the clamping.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0 | goku87 | DIY / Maintenance / Service | 127 | 02-19-2023 07:01 PM |
2018 Yaris SE 5MT - T-Sport w/Valvematic! | atomic_hoji | Performance Modifications | 130 | 02-23-2019 11:56 AM |
The "let's brainstorm how to make a piggyback work" thread | eTiMaGo | Forced Induction Forum | 83 | 08-17-2011 03:54 PM |
Quick deck harness question. | Taiyaki | In Car Entertainment + Electronics (audio / video / alarm) | 0 | 03-09-2010 05:23 PM |
Question on 09 Yaris Radio harness | fresnoyaris | In Car Entertainment + Electronics (audio / video / alarm) | 4 | 05-04-2009 06:35 AM |