|
09-08-2021, 02:18 AM | #1 |
Drives: Yaris manufactured after 2007 Join Date: Nov 2010
Location: North America
Posts: 250
|
How to protect paint in areas with extensive peeling clear coat?
Hello,
I am looking for advice as to how to best protect the areas of paint on my Yaris's body that have peeling clear coat. I have attached pictures of the peeling clear coat (and underlying paint) below. As you can see, most of the peeling is on the roof and immediately surrounding areas. The peeling roof area measures 62" x 35" (~5 ft x 3 ft), the other adjacent areas measure about 4 square feet for a total of 19 square feet. The area of peeling clear coat is extensive. In the future I would like to clear coat these areas myself using the DIY method described here. Or I might use a similar DIY method described here, in which I would spray a coat of paint first before covering with clear coat. Both these methods require good, extensive surface preparation that includes sanding. Unfortunately, I am busy and running out of time: I am getting ready for a new job, the cold rainy windy season is fast approaching, and I do not yet have a garage arranged where I could do the DIY work myself (I live in an apartment). So until I can come up with a more permanent solution, I want to try to protect the areas of paint with peeling clear coat. In addition, protecting the areas where the clear coat is still intact is a good idea too. I may be driving the car back to Montana from the Pacific Northwest of the US, including during the winter. The winters in Montana tend to be cold, snowy and icy. QUESTION(S): Does anybody have any suggestions as to what I can do to protect paint until I can do the DIY clear coating myself in say 8-10 months? I am looking for something I can apply in a few hours to a day or two at most. Would clear Plasti Dip be a good choice? There is a clear Plasti Dip on Amazon link, but some reviewers say it is more matte finish (clear, but dull or frosty) Would a synthetic wax be a good choice? Would a ceramic coating type application or wax be a good choice? Would one method for the areas with peeling clear coat be good and another, second method be good for the areas where the clear coat is still intact? Any comments from anybody will be welcomed. Thank you, R. LeftRearRoofPeelingClearcoat2.jpg RightFrontRoofPeelingClearcoat2.jpg RightRearRoofPeelingClearcoat.jpg Last edited by RMcG; 09-09-2021 at 12:43 PM. Reason: Brevity, clarity |
09-09-2021, 02:39 AM | #2 | |
Drives: Yaris manufactured after 2007 Join Date: Nov 2010
Location: North America
Posts: 250
|
Quote:
(The review for the single Plasti Dip can states: " Works well, coverage limited per can. This is good stuff, but the coverage you get from a can is small. You have to do a few coats, so 1 can ends up good for about 1 square foot.") Any comments anybody has will be welcomed. Thanks, R. |
|
Tags |
clearcoat, paint protection, peeling |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Painting Engine Cover | frownonfun | DIY / Maintenance / Service | 12 | 11-30-2013 11:07 PM |
Waxing the Yaris? | YotaYarisUSA | Wash, Wax, Detailing, Exterior Repairs | 134 | 09-12-2010 07:22 PM |
Clear coat chipping due to acid rain? | Woody_Woodchuck | Wash, Wax, Detailing, Exterior Repairs | 9 | 12-03-2008 06:15 PM |
Front Lip on S has peeling paint... | fnkngrv | DIY / Maintenance / Service | 7 | 09-05-2006 03:32 PM |