turbo project continued... - Page 11 - Toyota Yaris Forums

CtrlAltDefeat · 04-02-2009, 02:27 PM

Quote:

Originally Posted by eTiMaGo

wheeeeeeee pshh! wheeeeeee pshh! Getting ready for it...

hehe waiting anxiously for videos

at3GG · 04-02-2009, 02:32 PM

holy everything ...this is actually going to happen.....and soon..

supmet · 04-02-2009, 03:45 PM

Quote:

Originally Posted by eTiMaGo

wheeeeeeee pshh! wheeeeeee pshh! Getting ready for it...

after I read that post, I just made that noise in my head about 20 times looking at the turbo....

Parmas · 04-02-2009, 06:21 PM

Quote:

Originally Posted by cali yaris

Manifold will come a little later. The xB mani and TB will do for now; Art is making 280 whp with his built motor. Remember, we're doing this first round on the stock motor.

Hey garm I don't know if I understood this post.... are you making all this on a stock 1NZ? How much boost do you consider to use?

What about that 280whp motor of Art? Do you have any details on it?

PETERPOOP · 04-02-2009, 07:09 PM

On the first page he says this is the stock motor still. He has the built one on the side. They are going to use the stand alone on the stock one, tune it, get everything figured out, and then put the built motor in eventually. I think?

Parmas · 04-02-2009, 07:46 PM

Quote:

Originally Posted by PETERPOOP

On the first page he says this is the stock motor still. He has the built one on the side. They are going to use the stand alone on the stock one, tune it, get everything figured out, and then put the built motor in eventually. I think?

Why not using the built motor from the beginning?

The only purpose I could understand is to know how much a stock 1NZ could perform. When the stock motor hit its limits he will put the built motor? But maybe only garm can inform us exactly his intensions!

CASTREX · 04-02-2009, 07:49 PM

This car will be amazing..... The ultimate Yaris, period.

Don't thinkt that even in japan they have something similar...

I want to see a video of this car on the track....

Both on a straight line on in the course.

PETERPOOP · 04-02-2009, 07:54 PM

Quote:

Originally Posted by Parmas

Why not using the built motor from the beginning?

The only purpose I could understand is to know how much a stock 1NZ could perform. When the stock motor hit its limits he will put the built motor? But maybe only garm can inform us exactly his intensions!

Yah, I think he's going to run it until it blows or just decides to put the built motor in. I don't really get it either? but who cares what I think, he's the one with the greatest yaris on the planet.

cali yaris · 04-03-2009, 01:01 AM

you guys are too kind!

The idea is this. The built motor is brand new, has not ever been run or broken in.

I want to tune the car on the stock motor at 8 psi, and make sure we have reliable boost, fuel, air, no leaks, and a decent base map. THEN we will swap for the built motor and break it in properly (2000 rpm for 20 minutes, change the oil, etc etc).

I know it's a little bit of double work, but I'm not willing to break in an expensive stroked, ported/polished, built motor on an untested fuel and management system.

Art's xB has about the same motor I have. We are hoping that his AEM map will serve as a base map for me.

PETERPOOP · 04-03-2009, 04:26 AM

That is a smart plan. Can't wait! You are our idol.

Parmas · 04-03-2009, 02:42 PM

Quote:

Originally Posted by cali yaris

you guys are too kind!

The idea is this. The built motor is brand new, has not ever been run or broken in.

I want to tune the car on the stock motor at 8 psi, and make sure we have reliable boost, fuel, air, no leaks, and a decent base map. THEN we will swap for the built motor and break it in properly (2000 rpm for 20 minutes, change the oil, etc etc).

I know it's a little bit of double work, but I'm not willing to break in an expensive stroked, ported/polished, built motor on an untested fuel and management system.

Art's xB has about the same motor I have. We are hoping that his AEM map will serve as a base map for me.

Just a curiosity garm... what power do you expect the stock motor can output with the setup you are building? And after you swap with the built motor, what are you going to do with the stock motor?

Sabretooth · 04-03-2009, 03:07 PM

Lets start the betting game on how much WHP Garm can get out of the stock engine, proper tune that is...

I say 203whp

Lets make it a contest for a $50 Microimage gift card...lol j/k

Parmas · 04-03-2009, 05:38 PM

Quote:

Originally Posted by Sabretooth

Lets start the betting game on how much WHP Garm can get out of the stock engine, proper tune that is...

I say 203whp

Lets make it a contest for a $50 Microimage gift card...lol j/k

I hope the best for garm especially because it is running with many parts I already own like the garrett turbo, the walbro 255 and ofcourse the 1NZ!

I wish you reach high power on stock (at most 200Bhp) imagine then the power of a built 1NZ!

Good LUCK my friend!

cali yaris · 04-03-2009, 05:41 PM

stock motor will be sold or set up with ITB's as a beastly N/A project.

AlexNet0 · 04-04-2009, 01:04 AM

^ did you have forged rods in your old one? I may need them... oh and you should PM me with the price of one of those little kits we discussed before..

my bet on best tune is 215

Other than my rambling above, AWESOME prject so far, i cannot wait to see the results

cali yaris · 04-04-2009, 02:58 AM

Quote:

^ did you have forged rods in your old one? I may need them...

no.. it's stock.

eTiMaGo · 04-04-2009, 03:32 AM

dudes.... the goal is 300whp and knowing Garm, he won't quit till he reaches it

jkuchta · 04-04-2009, 04:38 AM

My bet is 315 AT THE WHEELS....then he'll need larger diameter wheel studs!

04-02-2009, 02:32 PM	#182
at3GG Drives: 07 metmet LB Join Date: Oct 2008 Location: VA Beach Posts: 648	holy everything ...this is actually going to happen.....and soon.. __________________ F5 CAI, MR axleback, MR Header, NST SSK. Full Exhaust wrap, AT3 Custom SSK Konig Heliums 15x6.5 Black Tanabe Df210's

04-03-2009, 01:01 AM	#189
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	you guys are too kind! The idea is this. The built motor is brand new, has not ever been run or broken in. I want to tune the car on the stock motor at 8 psi, and make sure we have reliable boost, fuel, air, no leaks, and a decent base map. THEN we will swap for the built motor and break it in properly (2000 rpm for 20 minutes, change the oil, etc etc). I know it's a little bit of double work, but I'm not willing to break in an expensive stroked, ported/polished, built motor on an untested fuel and management system. Art's xB has about the same motor I have. We are hoping that his AEM map will serve as a base map for me. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

04-03-2009, 03:07 PM	#192
Sabretooth 37HSSV View User's Garage Drives: '11 Mazdaspeed 3 Join Date: Jan 2007 Location: St Cloud FL Posts: 1,395	Lets start the betting game on how much WHP Garm can get out of the stock engine, proper tune that is... I say 203whp Lets make it a contest for a $50 Microimage gift card...lol j/k __________________ 07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance.

04-03-2009, 05:41 PM	#194
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	stock motor will be sold or set up with ITB's as a beastly N/A project. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

04-04-2009, 01:04 AM	#195
AlexNet0 View User's Garage Drives: '07 Yaris 3dr Join Date: Nov 2008 Location: Rockland, ME Posts: 1,638	^ did you have forged rods in your old one? I may need them... oh and you should PM me with the price of one of those little kits we discussed before.. my bet on best tune is 215 Other than my rambling above, AWESOME prject so far, i cannot wait to see the results __________________ ---------- MI-YW ----------

04-02-2009, 07:09 PM	#185
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	On the first page he says this is the stock motor still. He has the built one on the side. They are going to use the stand alone on the stock one, tune it, get everything figured out, and then put the built motor in eventually. I think?

04-02-2009, 07:49 PM	#187
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	This car will be amazing..... The ultimate Yaris, period. Don't thinkt that even in japan they have something similar... I want to see a video of this car on the track.... Both on a straight line on in the course.

04-03-2009, 04:26 AM	#190
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	That is a smart plan. Can't wait! You are our idol.

04-04-2009, 03:32 AM	#197
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	dudes.... the goal is 300whp and knowing Garm, he won't quit till he reaches it __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

04-04-2009, 04:38 AM	#198
jkuchta View User's Garage Drives: 2007 Yaris hatch (red) Join Date: Sep 2007 Location: L.A. Posts: 557	My bet is 315 AT THE WHEELS....then he'll need larger diameter wheel studs!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Kit - trade for stock parts!	crankyelbow	Items for Sale by private party	62	02-03-2009 01:30 PM
delayed turbo project...	joey1320	Forced Induction Forum	8	09-27-2007 12:18 AM
Engine Swap / Turbo....	Sabretooth	Forced Induction Forum	10	09-13-2007 07:23 PM
small update on turbo project...	joey1320	Forced Induction Forum	26	08-03-2007 05:29 AM
Vitz Rs turbo vs U.S. Yaris add turbo?	weaponrcamry	Performance Modifications	18	08-09-2006 09:45 PM